VBrick Systems VB6000, VB4000, VB5000 manual MPEG-2/MPEG-4 Remote Control

Page 51

 

 

Using the IR Remote

 

 

 

 

 

 

 

Dialog Window

Description

 

 

 

 

Gateway

This screen will display the current Gateway of the VBrick. If the

 

 

current setting does not need to be modified press the select key.

 

 

Otherwise enter in the correct value followed by the select key. If the

 

 

Box IP, Subnet Mask or Gateway IP has been modified and there are

 

 

no errors reported on the front panel, the VBrick will now reboot.

 

 

 

 

Slot x Dest IP

This screen will display the current Destination IP Address for Slot x

 

 

of the VBrick. If the current setting does not need to be modified press

 

 

the select key. Otherwise enter in the correct value followed by the

 

 

select key.

 

 

 

 

Slot x Dest Port

This screen will display the current Destination Port for Slot x of the

 

 

VBrick. If the current setting does not need to be modified press the

 

 

select key. Otherwise enter in the correct value followed by the select

 

 

key. If the Destination IP or Destination Port has been modified and

 

 

there are no errors reported on the front panel, the VBrick is now

 

 

using the new settings.

 

 

 

 

Slot x Rcv IP Addr

MPEG appliances only. This screen will display the current Receive IP

 

Screen

Address for slot x of the VBrick. If the current setting does not need

 

 

to be modified press the select key. Otherwise enter in the correct

 

 

value followed by the select key.

 

 

 

 

Slot x Rcv Port

MPEG appliances only. This screen will display the current Receive Port

 

Screen

for slot x of the VBrick. If the current setting does not need to be

 

 

modified press the select key. Otherwise enter in the correct value

 

 

followed by the select key. If the Receive IP or Receive Port has been

 

 

modified and there are no errors reported on the front panel, the

 

 

VBrick is now using the new settings.

 

 

 

 

Show BoxIP

This will allow the enabling or disabling of the scrolling IP Address on

 

 

the Front Panel Display of the VBrick appliance for security (6 = no, 9

 

 

= yes).

 

 

 

MPEG-2/MPEG-4 Remote Control

VBrick appliances support features provided through an optional hand held IR (infrared) remote control. The IR remote enables users to access VBrick appliance functions and control functions with simple program commands. Front Panel Edit options are model dependent. For example, a dual encoder will allow editing of two destination IP Addresses and ports. The IR remote control has limited functionality. If enabled, you can use the IR remote control to set the IP address and perform certain other functions. Use the * button for the decimal point and the Left and Right buttons to erase entries. Aim the remote at the sensor on the front panel IR Port of the encoder. To enable or disable the IR remote, go to Configuration: System > General > IR Enable. The remote is enabled by default.

VBrick Appliance Getting Started Guide

43

Page 50 Page 52
Image 51
Page 50 Page 52
Contents VB4000-5000-6000 Series Network Video Appliances Copyright Contents Using the IR Remote Command Line InterfaceIntegrated Web Server Index VB6000 ReferenceContents For More Information OrganizationGetting Help Font ConventionsPrinter-Friendly Topics in this chapter Setup OverviewCOM Using the Quick Start GuideAppliance Setup Connect Output to a Video MonitorConnect an Audio/Video Input Source Get the IP Address from a Dhcp Server Power-on the ApplianceConnect to the IP Network Set the IP AddressSet the IP Address with HyperTerminal Set the IP Address with the Remote ControlVerify Operation Install StreamPlayer PlusVerify Mpeg 2 Operation Verify Mpeg 4 OperationVerify WM Operation StreamPlayer Plus Overview Installing a System UpgradePassword button VBrick Tool Description Management ToolsVBDirectory Front Panel EditManagement Tools Simple Network Management Protocol TelnetVBrick SDK VBrick Systems, Inc Understanding I, B, P Frames, Delay, and Synchronization Video BasicsMPEG-2 Encoder Compression Group of Pictures GOP Reference DistanceInterrelationship GOP Length N Reference Frame Distance MPEG-2 DelayMPEG-4 Audio Receiver Sensitivity Transmit PowerMPEG-2 Audio MPEG-4 Encoder CompressionGetting the Best Video Assigning Multicast Addresses IP Address Configuration using Host NamesVideo Resolution Network ConsiderationsPriority Level Type of Service IP Differentiated Services DiffservEthernet IP Typical ApplicationsVBrick Video Stream Handling Network JitterOne-Way Broadcast and Desktop Streaming Two-Way Interactive Conferencing Serial Port Passthrough VBrick AccessoriesHow Passthrough Works Serial Port Passthrough Using Telnet Embedded Web Browser Mpeg FeaturesBillboard Picture-in-PictureWM Features VBrick Systems, Inc Integrated Web Server Using IWSLogin User Level Default User Name Default Password PrivilegesWelcome Screen Option Description Menu OptionsMaking Changes View ModeEdit Mode RebootingLogout Using Apply, Revert, and DefaultsMultiple Applies Serving Custom ASX and Html FilesVBrick Systems, Inc Key Description Front Panel EditDialog Window Description Error Message DescriptionMPEG-2/MPEG-4 Remote Control Controlling a VBStar Button Description Icon Description Controlling VBrick FeaturesPicture In Picture BillboardConference Guide Program Guide WM Remote ControlConnection Modes Connecting with HyperTerminalConnecting with Telnet MIB-Based Command Line Interface Finding VBrick Parameters Command ResponseSetting VBrick Parameters Using a MIB BrowserLogging Using Get/Set Variable Commands Using Get/Set Table CommandsBeginning or Ending an Edit Session VBrick Stab vbrickSlot1EncoderHttpPushEnable.3=2 Error Handling Applying ChangesSaving Changes Example 1 Set Variable CLI ExamplesExample 5 Set Table Variables Example 2 Get VariableExample 3 Set Multiple Variables Example 4 Get Table VariablesCLI Sample Script Forever Menu-Based Command Line Interface Setting and Changing Parameters Editing Configuration ParametersSelecting Parenthetical Items Setting System Date and TimeOther Editing Keys Using SpacesSeries Decoder Models VBrick Appliance ModelsVB6000 Series Encoder ModelsVB6000 Expanded Vbssm Expanded Vbssm Activity LEDSequence Color Description Pin Function Direction Device InterfacesRS-232/422/485 COM Port Pinouts Solid. Indicates no Video In otherwise the LED is offVideo-In and Video-Out Composite Power In Entry InterfacePower Out Exit Interface Ethernet PortPin Description Type Video-In and Video-Out S-Video InterfaceAudioMate Audio In and Audio OutVpp Balanced Relay Port Activity LED Event TriggeringChange RTS/DTR Control to Force On and click Apply VBrick Systems, Inc Index Index
Related manuals
Manual 156 pages 46.18 Kb Manual 128 pages 47.3 Kb
Top Page Image Contents