RF-Link Technology AWS-5832-VSR user manual About this document

Page 2

About this document

This software quick manual is intended for user of 5.8 GHz Wireless Video Server. The default IP setting of Wireless Video Server is DHCP. Please refer to user manual of Wireless Video Server, if there is not DHCP Server on your network.

IMPORTANT

Check PC specification requirements

Check OS platform requirements

Install IPSurveillance Application Software before you start working with Wireless Video Server.

Read special notes and important configuration information.

Image 2

Contents AWS-5832-VSR About this document Table of Contents Periodic Timer Motion Detection Product Overview Product CD Housing and Connectors Page Back side look Page Factory Setting Initial IP Address Install Ipsurveillance Application SoftwareConnecting to Network Which Browser to USE?Using Ipscan Double right click Change Network Settings by Ipscan Page Access Wireless Video Server BrowserInstall and RUN Activex Control Initial Username & Password Viewing and OperattingViewing Area Operating Area Control Panel Settings PALWEB Interface Settings Status Network Static IPDynamic IP PPPoE Settings Video Settings VideoWhen choosing Mjepg streaming, only support I Only mode Color Settings Video PreviewEvent Rule MAX Client LimitEvents Handled PTZModifying Rule Lists Actions TriggeredRule Lists ADDING/DELETING Capture Date & Time OSD Dwell Mode Setup ATUO-SCAN Mode PTZ Control PortWeb Ddns IPv4 DdnsMail Smtp Settings SMTP/FTPFTP Settings Trigger Setup Periodic TimerMotion Detection Page PRE/POST Setting Account Security „ High Maintenance Firmware updateFactory Default No Software Installation Required Supported OSSteps for Using USB config port Windows XP PC Page Static / Dhcp / PPPoE