RF-Link Technology AWS-5832-VSR user manual Dynamic IP

Page 24

address is correct. If IP was changed in web configuration, you cannot return to

initial login page after reboot.

DYNAMIC IP

¾If DHCP server is on LAN and you want to allocate Dynamic IP address, use DHCP.

¾Click “OK” button.

¾Reboot is required and will be automatically triggered after you press “OK”. Wait for count down timer to finish and page will refresh

automatically and you should see initial login page.

Note:

Always use IPScan to find the MAC address after reboot and double check the IP address is correct. If IP was changed in web configuration, you cannot return to initial login page after reboot.

24

Image 24
Contents AWS-5832-VSR About this document Table of Contents Periodic Timer Motion Detection Product Overview Product CD Housing and Connectors Page Back side look Page Install Ipsurveillance Application Software Connecting to NetworkFactory Setting Initial IP Address Which Browser to USE?Using Ipscan Double right click Change Network Settings by Ipscan Page Access Wireless Video Server BrowserInstall and RUN Activex Control Initial Username & Password Viewing and OperattingViewing Area Operating Area Control Panel Settings PALWEB Interface Settings Status Network Static IPDynamic IP PPPoE Settings Video Settings VideoWhen choosing Mjepg streaming, only support I Only mode Color Settings Video PreviewEvent Rule MAX Client LimitEvents Handled PTZActions Triggered Rule Lists ADDING/DELETINGModifying Rule Lists Capture Date & Time OSD Dwell Mode Setup ATUO-SCAN Mode PTZ Control PortWeb Ddns IPv4 DdnsMail Smtp Settings SMTP/FTPFTP Settings Trigger Setup Periodic TimerMotion Detection Page PRE/POST Setting Account Security „ High Maintenance Firmware updateFactory Default No Software Installation Required Supported OSSteps for Using USB config port Windows XP PC Page Static / Dhcp / PPPoE