Airlink101 AIC1620POE user manual

Page 12

Step 7 Please configure a unique static IP address for your camera. The IP address you configure must match with your local network setting. For example, if your router’s IP address is 192.168.1.1, and its subnet mask is 255.255.255.0, the IP address you assign to the camera must be 192.168.1.x, where x is a number from 2~254, but outside of the DHCP range (i.e. 100~199). You can refer to the router’s user manual to find out the required information.

The settings configured in the below sample are for your reference:

IP Address: 192.168.1.205

Submask: 255.255.255.0

Default Gateway: 192.168.1.1 (this is the router’s IP address)

The benefit of setting a static IP for your camera is that you can always locate it with its fixed IP address.

NOTE If you are not sure how to configure the correct IP settings, you can select DHCP to let your router dynamically assign an IP to your camera.

Enter “admin” for both ID and password, and click Change.

Wait for 30 seconds and the camera will be restarted. Click OK when you see this message.

- 11 -

Image 12
Contents SkyIPCam1620 PoE MPEG4 3GPP Network Camera Technical Support Checking the Package Contents Getting to Know Your CameraRear View Gpio and RS485Features and Benefits Accessing the Camera using Web Browser System RequirementsMultiple Applications Supported NetworkingApplications of the Camera Home ApplicationsConnecting Your Camera to LAN Power LED Solid Amber Link LED Flashing Green Chapter Camera Configuration Setting up Your CameraPage Page Page Page Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Setup Basic SystemBasic Indication LEDAdministrator Basic Date & TimeBasic User Date & TimeGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny Setting up Video & Audio Image SettingOverlay Setting Video & Audio CameraVideo & Audio Video 3GPPVideo & Audio Audio Video & Audio Text OverlayCamera Microphone Camera Speaker OutPage Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect TriggerEvent Configuration Schedule Trigger Event Configuration Gpio TriggerSent to Record to Network Storage, Send Email, or FTP Upload Factory Reset System RebootConfiguration Update FirmwareRS-485 About the Control Buttons Control Buttons of RS-485Information Information Device InfoInformation System Log Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for RecordingPlayback the Recording Files Page Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap Configuring the System User ManagementEvent Configuration Configuring Event TriggerSetting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support