Airlink101 AIC1620POE user manual Motion Detect

Page 32

4.5 Motion Detect

*This function can only be configured in Windows Internet Explorer.

The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas.

To enable the detecting area, select Window 1 or 2 from the pull-down list, and then check Enable. When the detecting area is enabled, you can use the mouse to move the detecting area and change the area coverage.

-Name: Assign a name to the detecting area.

-Threshold: Move the slide bar to adjust the level for detecting motion. Make sure the threshold (the horizontal line) is low (sensitive) enough to come across the waves (appear when motion detected), so that the events (i.e, emailing snapshot, FTP uploading) you set up in Event Config will be triggered.

- 31 -

Image 32

Contents SkyIPCam1620 PoE MPEG4 3GPP Network Camera Technical Support Checking the Package Contents Getting to Know Your CameraRear View Gpio and RS485Features and Benefits Accessing the Camera using Web Browser System RequirementsMultiple Applications Supported NetworkingApplications of the Camera Home ApplicationsConnecting Your Camera to LAN Power LED Solid Amber Link LED Flashing GreenChapter Camera Configuration Setting up Your CameraPage Page Page Page Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Setup Basic SystemBasic Indication LEDAdministrator Basic Date & TimeBasic User Date & TimeGuest Network Network Network SettingsIP Setting Ports Number Ddns SettingUPnP Deny Network IP FilterAccept Setting up Video & Audio Image SettingOverlay Setting Video & Audio CameraVideo & Audio Video 3GPPVideo & Audio Audio Video & Audio Text OverlayCamera Microphone Camera Speaker OutPage Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect TriggerEvent Configuration Schedule Trigger Event Configuration Gpio TriggerSent to Record to Network Storage, Send Email, or FTP Upload Factory Reset System RebootConfiguration Update FirmwareRS-485 About the Control Buttons Control Buttons of RS-485Information System Log InformationInformation Device Info Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for RecordingPlayback the Recording Files Page Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap Configuring the System User ManagementEvent Configuration Configuring Event TriggerSetting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Gpio Terminal Application Connector Pin AssignmentInterface Schematic Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support