Airlink101 AIC1620POE user manual Main Window and Item Feature

Page 42

5.2 Main Window and Item Feature

When you start and login to UltraView, the Main window will display as below:

The Main window provides you with the information on operating the system, as well as the control panel such as the Quick Launch buttons, and so on.

NOTE UltraView Pro requires the resolution setting up to 1024 x 768. For best view of the application, you are recommended to configure the resolution setting to 1024 x 768 or higher; otherwise, it cannot be displayed on the screen when launching the program.

Live View Window displays the live video of the connected camera(s).

Quick Launch Buttons are located below the Live View Window, providing you with the following quick-launch functions:

Button Function

Click to select Logout or Close UltraView Pro.

Click to select Restore Recording Type, All Continuous Recording, or Stop All Recording.

Click and then select to display the View Setting window, switch to the eMap View window, or check the Camera Status.

Click to display the Playback window.

Click to display the Schedule Configuration window.

Click to configure the event settings: Event Server, Address Book, and Event Trigger.

Click to configure Device Setting and Recording Setting.

Click to set the Account, Language, and System Setting; or view the Version or the program.

- 41 -

Image 42

Contents SkyIPCam1620 PoE MPEG4 3GPP Network Camera Technical Support Checking the Package Contents Getting to Know Your CameraRear View Gpio and RS485Features and Benefits Multiple Applications Supported Accessing the Camera using Web BrowserSystem Requirements NetworkingApplications of the Camera Home ApplicationsConnecting Your Camera to LAN Power LED Solid Amber Link LED Flashing GreenChapter Camera Configuration Setting up Your CameraPage Page Page Page Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Basic SetupBasic System Indication LEDBasic User AdministratorBasic Date & Time Date & TimeGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny Overlay Setting Setting up Video & AudioImage Setting Video & Audio CameraVideo & Audio Video 3GPPCamera Microphone Video & Audio AudioVideo & Audio Text Overlay Camera Speaker OutPage Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect TriggerEvent Configuration Schedule Trigger Event Configuration Gpio TriggerSent to Record to Network Storage, Send Email, or FTP Upload Configuration Factory ResetSystem Reboot Update FirmwareRS-485 About the Control Buttons Control Buttons of RS-485Information Information Device InfoInformation System Log Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for RecordingPlayback the Recording Files Page Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap Configuring the System User ManagementEvent Configuration Configuring Event TriggerSetting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support