Airlink101 AIC1620POE user manual Rear View, Gpio and RS485

￿Rear View

GPIO and RS485

is used to connect the external devices.

Ethernet Cable Connector* connects the network cable, which supports the NWay protocol so that the camera can detect the network speed automatically.

Reset Button will restart the camera when it is pressed quickly; when it is pressed and held for five seconds, the camera will restore the factory default settings.

Audio I/O Connectors:

Audio Out connects an external active speaker.

Mic In connects an external microphone.

DC Power Connector connects the AC power adapter, in order to supply power to the camera.

*The camera’s Ethernet port supports IEEE 802.3af Power-over-Ethernet (PoE) standard that enables DC power to be supplied to the camera using wires in the connecting twisted-pair cable. Any 802.3af compliant device attached to the port can directly supply power to the camera over the twisted-pair cable without requiring its own separate power source. This capability gives the network administrator centralized power control, which translates into greater network availability.

- 3 -