Sylvania SDPF833 user manual Daily protection and maintenance

Page 12

Chapter 3 Daily protection and maintenance

3.1 Digital photo frame protection

To reduce the risk of fire or electric shock, do not expose or use this product at rainy or moisture place

Do not block the intake of the back panel Do not place this unit under sunshine

3.2 Panel cleanness

The panel is easy to broken , please take and put it gently

If the panel ‘s surface is dirty, please clean it with the soft cloth , if necessary , can wet the cloth with little water then clean it

Chapter 4 Trouble Shooting

1. Question: What kind of photos does this device support?

Answer: The frame will display digital photos that are stored in the JPEG format, which is the standard format for nearly all digital cameras. Some cameras allow images to be stored as TIFF or RAW files as well as JPEG. The JPEG etc format is compatible with the frame. Photos of up to million pixels can be displayed.

2.Question: What should I do if the system does not respond when the power is turned on?

Answer: Please make sure the unit is properly connected to a power source. Then turn it off, re-connect the power and turn it on again.

3. Question: Why is the memory card not recognized?

Answer: The memory card might be inserted backwards or is not pushed far enough. After inserting the memory card in the right direction, if the still cannot be read, please turn off the unit and then power it on again.

11

Image 12
Contents USER’S Manual Contents Specification Packaging listOperation of inserting the cards Button of remote control manual Button operation introduction for main unitPhoto Setting Display Interval Function main menuTransition Effect BrowseAuto play TFT Tint TFT SharpnessCustom Setup 3.3.1 OSD Language Repeat modeEncoding Default ExitPhoto CalendarDate Display Set DateSet Time Daily protection and maintenance