Sylvania SDPF833 user manual Function main menu, Photo Setting Display Interval

Page 5

2.4 Function: main menu

under this mode:, have four function menu for selection: PHOTOSETUP CALENDARCLOCK select one function press ENTER to operate the function

3. System Settings

SelectSetupfrom the main menu, press the ENTER button, and you will enter the settings mode. In addition, under other function modes, you can also enter the settings mode by pressing the SETUP button. The following illustration shows the initial screen in the settings mode, and in the following section we will introduce the various functions of the settings mode.

The adjustment screen for the SETUP menu is as follows:

3.1 Photo Setting

3.1.1 Display Interval

This option can be used to set the length of time for display of each image. There are six options: 5 seconds, 10 seconds, 15 seconds, 30 seconds, one minute, or three minutes.

4

Image 5
Contents USER’S Manual Contents Operation of inserting the cards SpecificationPackaging list Button operation introduction for main unit Button of remote control manualFunction main menu Photo Setting Display IntervalAuto play Transition EffectBrowse TFT Sharpness TFT TintEncoding Custom Setup 3.3.1 OSD LanguageRepeat mode Exit DefaultPhoto CalendarSet Date Date DisplaySet Time Daily protection and maintenance