Sylvania SDPF833 user manual Default, Exit, Photo, Calendar

Page 9

3.3.4 Default

By setting this option, all settings will be reset to the original system settings.

3.4 Exit

Leaves the setup menu, and goes back to the main menu.

4.Photo

From the main menu, select Photo, press the ENTER key, the system will automatically detect whether a storage device is conne- cted (USB drives or memory cards). If there is no storage device is connected, the system will return to the main menu.After storage device is properly connected and read / write access is Enter key to enter the auto-play mode when playing, press ENTER key can pause the playing , pressŸ / Ÿkey can browse the photo page by

SDJHSUHVVŸEXWWRQWRIOLSKRUL]RQWDOO\SKRWRV3UHVVźEXWWRQVWR IOLSYHUWLFDOO\SLFWXUHSUHVV=220EXWWRQVWR]RRPSKRWRVSUHVV

rotate button to rotate the photospress EXIT key can return to photo browsing mode , press EXIT key again can return to the main

PHQXXQGHUEURZVHSKRWRPRGHSUHVVŸźNH\WRVHOHFW

the desired photo, press Ÿ

or ENTER to play the photo ,press

Ÿ

 

 

to pause the photo, press

Ÿ

 

 

 

or ENTER key to play again.

 

 

 

 

 

 

 

 

 

5.Calendar

After selecting Calendarfrom the main menu, press the ENTER button, and you will enter the date setting mode.

8

Image 9
Contents USER’S Manual Contents Specification Packaging listOperation of inserting the cards Button operation introduction for main unit Button of remote control manualFunction main menu Photo Setting Display IntervalTransition Effect BrowseAuto play TFT Sharpness TFT TintCustom Setup 3.3.1 OSD Language Repeat modeEncoding Exit DefaultPhoto CalendarSet Date Date DisplaySet Time Daily protection and maintenance