Sylvania SDPF833 user manual Transition Effect, Browse, Auto play

Page 6

3.1.2 Transition Effect

This option is used to set the transition effect as images change.

3.1.3 Browse

There are two kinds of “Photo” modes, one is the “File Manager” mode, and the other is the “Thumbnail” mode.

3.1.4 Auto play

This setting can be set to either “on” or “off”. This setting decides whether or not to activate the automatic display function after entering the “Photo” mode. If this option is set to “on”, then the system will enter “slide show mode” after you enter “Photo”; if it is set to "off", then the system will enter either File Manager mode or Browser mode, according to the Browse settings set by the user.

5

Image 6
Contents USER’S Manual Contents Specification Packaging listOperation of inserting the cards Button of remote control manual Button operation introduction for main unitPhoto Setting Display Interval Function main menuTransition Effect BrowseAuto play TFT Tint TFT SharpnessCustom Setup 3.3.1 OSD Language Repeat modeEncoding Photo DefaultExit CalendarDate Display Set DateSet Time Daily protection and maintenance