MemoryFrame User’s Manual
The MemoryFrame will display the following sequence of messages to show the progress of the firmware update:
“FLASH BEING ERASED” “FLASH BEING LOADED” “READING FLASH” “VERIFYING FLASH”
If an error occurs in the above process (either erase, loading, or verification), the MemoryFrame will display the following message:
“REDO FLASH- DON’T POWER OFF ( error code number)”
Caution! Important! Do not unplug or cut power to the MemoryFrame or PC. The above error message indicates that there was an error (either erase, loading, or verification) during the firmware update. The firmware update MUST BE
If no errors occur, then once the new firmware update file has been loaded into the MemoryFrame’s storage memory, the MemoryFrame will indicate it is done by displaying the following message indicating when you can reset the MemoryFrame:
“PLEASE POWER THE MEMORYFRAME OFF/ON”
Only then can you turn the MemoryFrame OFF, then turn it back ON. When the MemoryFrame goes into normal operation, the upgrade has been completed.
Enjoy the new firmware!
Copyright© 2002 Pacific Digital Corporation | Page 56 |