User Manual BDL3231/BDL4231
C O N F I G U R AT I O N
S W I T C H O N / O S D | > |
P I C T U R E / S O U N D | > |
S E C U R I T Y | > |
C O N T R O L | > |
V I D E O A D J U S T M E N T | > |
F E AT U R E S
V I D E O A D J U S T M E N T
H O R I Z O N TA L | < > | |
V E R T I C A L | < | > |
P H A S E | < > | |
C O L C K | < | > |
A U T O A D J U S T |
| > |
C O N F I G U R AT I O N
S W I T C H O N / O S D | > |
P I C T U R E / S O U N D | > |
S E C U R I T Y | > |
C O N T R O L | > |
V I D E O A D J U S T M E N T | > |
F E AT U R E S | > |
| F E AT U R E S |
S M A R T P O W E R | L O W |
O P E R AT H O U R S | 0 |
P I P | > |
VIDEO ADJUSTMENT (Only supported in PC-A mode)
Fine tuning display geometry and time frequency parameter. Use cursor UP/DOWN button to toggle between
•HORIZONTAL - adjust the horizontal placement of the picture.
•VERTICAL - adjust the vertical placement of the picture.
•PHASE - eliminate the horizontal interfering lines.
•CLOCK - eliminate the vertical interfering lines.
•AUTO ADJUST - automatically adjust the best image position.
Use cursor LEFT/RIGHT to adjust
FEATURES
In this submenu, the features settings of the monitor can be configured.
SMARTPOWER
Set the monitor to reduce the power automatically.
Use cursor LEFT/RIGHT to toggle between
•OFF
•LOW
•MEDIUM
•HIGH
| F E AT U R E S |
S M A R T P O W E R | L O W |
O P E R AT H O U R S | 0 |
P I P | > |
F E AT U R E S
S M A R T P O W E R | L O W |
O P E R AT H O U R S | 0 |
P I P | > |
|
| P I P |
P I P | O N | Y E S |
P I P S O U R C E | AV | |
P I P | P O S I T I O N | 1 |
OPERAT HOURS
OPERAT HOURS automatically counts the usage hours of the monitor.
PIP (Only supported in
Set
Use cursor LEFT/RIGHT to toggle between
PIP ON
Use cursor LEFT/RIGHT button to toggle between
• YES | • NO |
|
| P I P |
P I P | O N | Y E S |
P I P S O U R C E | AV | |
P I P | P O S I T I O N | 1 |
|
| P I P |
P I P | O N | Y E S |
P I P S O U R C E | AV | |
P I P | P O S I T I O N | 1 |
PIP SOURCE
Choose of video source for PIP screen.
Use cursor LEFT/RIGHT button to toggle between
• AV • CARD AV
PIP POSITION
Select which corner of the position of PIP.
Use cursor LEFT/RIGHT button to toggle between
• 1 | • 3 |
• 2 | • 4 |
|
| P I P |
P I P | O N | Y E S |
P I P S O U R C E | A V | |
P I P | P O S I T I O N | 1 |
Note: You can also use 
button on the remote control to call up OSD screen, then, use cursor UP/DOWN button to toggle between PIP ON, PIP SOURCE, and PIP POSITION.