Philips BDL3231, BDL4231 user manual Input Mode, VGA Resolution, Sdtv Resolution, Hdtv Resolution

User Manual BDL3231/BDL4231

6.INPUT MODE

VGA Resolution

Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Stand for Mode
Resolution	H Pixels	V Lines
			60 Hz	25.175 MHz
VGA	640	480	72 Hz	31.5 MHz	4:3	Video Graphic Array
			75 Hz	31.5 MHz
WVGA	848	480	60 Hz	33.75 MHz	16:9	Wide Video Graphic
						Array
			60 Hz	40 MHz
SVGA	800	600	72 Hz	50 MHz	4:3	Super VGA
			75 Hz	49.5 MHz
			60 Hz	65 MHz		Super VGA Extended
XGA	1024	768	70 Hz	75 MHz	4:3
						Graphic Array
			75 Hz	78.5 MHz
WXGA	1360	768	60 Hz	84.75 MHz	16:9	Wide XGA
SDTV Resolution
Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Stand for Mode
Resolution	H Pixels	V Lines
480i	720	480	29.97 Hz	13.5 MHz	4:3	Modified NTSC Standard
480p			59.94 Hz	27 MHz
576i	720	576	25 Hz	13.5 MHz	4:3	Modified PAL Standard
576p			50 Hz	27 MHz
HDTV Resolution
Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Stand for Mode
Resolution	H Pixels	V Lines
720p	1280	720	50 Hz	74.25 MHz	16:9	Normally DVB Mode
			60 Hz
1080i	1920	1080	25 Hz	74.25 MHz	16:9	Normally ATSC Mode
			30 Hz

•The PC text quality is optimum in WXGA mode (1360 x 768, 60Hz).

•When this LCD is used as a PC display, 24-bit color is supported (over 16.7 million colors).

•Your PC display screen might appear different depending on the manufacture (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a display.

•If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the INPUT button to enter the video mode. Also, make sure that the PC is connected.

•When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.

•The display settings table complies to the IBM/VESA standards, and based on the analog input.

•The DVI support mode is regarded as same to the PC support mode.

•The best timing for the vertical frequency to each mode is 60Hz.

RETURN TO THE CONTENTS