Philips BDL3231, BDL4231 OSD Menu Language Choose of languages in user interface, Smartport

User Manual BDL3231/BDL4231

5.OSD MENU

	S E T U P
L A N G U A G E	E N G L I S H
C O M M U N I C A T I O N	>
C O N F I G U R A T I O N	>

5.1SETUP MENU

An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your monitor.

1.Press DISPLAY MENU button on the remote control.

2.Press cursor UP/DOWN button to choose the item you want to adjust.

3.Press cursor LEFT/RIGHT button to toggle between sub-menu or adjust the item you selected.

4.Press DISPLAY MENU button on the remote control to return to

sub-menu or press again to exit the menu.

5.1.1OSD MENU LANGUAGE Choose of languages in user interface.

Use cursor LEFT/RIGHT button to toggle between

• ENGLISH	• ITALIANO
• FRANCAIS	• ESPANOL
• DEUTSCH	• 中文

	C O M M U N I C AT I O N
S M A R T P O R T	S P - S P I
S T O R E	>
R S 2 3 2 I D	6 3
S P E E D	1 2 0 0
D C M T Y P E	N O S O U R C E S W I T C H

5.1.2 OSD MENU COMMUNICATION

1.Press DISPLAY MENU button on the remote control.

2.Use cursor DOWN button to highlight COMMUNICATION.

3.Use cursor RIGHT button to enter it.

4.Press cursor UP/DOWN button to toggle between SMARTPORT, STORE, RS232 ID, SPEED or DCM TYPE.

5.Press DISPLAY MENU button on the remote control to return to sub-menu or press again to exit the menu.

SMARTPORT

Use cursor LEFT/RIGHT button to toggle between OFF, SP-SPI, and SP-I2C. For normal stand-alone applications select OFF under the

SMARTPORT.

Important note:

The COMMUNICATION menu shows items that are relevant for system integrators that develop their own cards (also called Smart Cards or Data Communication Modules, DCM’s) and for the use of Philips branded Smart Cards. These items can be relevant in case a Philips or third party Smart Card is used that requires a certain setup. The card slot of the set has several by the industry accepted serial interfaces (SP-SPIand SP-I2C) of which only one will be used at the same time. Please consult the User Manual of the applicable card for the correct COMMUNICATION setup.

The RS232 function is independently available of SP-SPIand SP-I2Cand is always switched "ON".

The communication SPEED (baud rate) can be adjusted to the required baud rate of the external control system.

RETURN TO THE CONTENTS