1151B1 and 1151B2 Power Supplies
Connecting the cables
To connect IP telephones, PCs, servers, routers, workstations, and hubs.
1.Connect the Ethernet connection cable (not supplied) to a 10/100 megabits per second port on the front panel of the Avaya C360 series switch.
Note:
Use standard RJ45 connections and a CAT5 cable for 100 megabits per second operation.
2.Connect the other end of the cable to the Ethernet port of the PC, server, router, workstation, IP telephone, switch, or hub.
3.Check that the appropriate link (LNK) LEDs light up.
1151B1 and 1151B2 Power Supplies
The 1151B1 and 1151B2 power supplies are a local power supply. The telephones or consoles connect directly to them through an RJ45 connector. The 1151B2 has a battery backup.
These power supplies comply with the Underwriters Laboratories Inc. (UL) Standard UL 60950 third edition.
Complies | UL 60950 |
|
|
Certified | CSA C22.2 |
|
|
Approved | EN |
|
|
Approved | CE Regulatory Compliance |
|
|
For safety instructions, see Important safety instructions for 1151B1 and 1151B2 Power Supplies on page 132. For installation instructions, see Connecting the 1151B1 or 1151B2 Power Supplies on page 133.
