Philips CED228 Select preset equalizer, Press or repeatedly to select the item to be adjusted

Page 24

2Press or repeatedly to select the item to be adjusted:

•[BAL] balance range: 10Lto 10R. (L = left speaker, R = right speaker)

•[FAD]fader range: 10R to 10F. (R = rear speaker, F = front speaker)

•[SUB] subwoofer : ON, OFF

•[SUB VOL] subwoofer volume: 0 to 20

3Press or to change value, then press .

• You can also turn to select a value.

4Press to exit.

Select preset equalizer

You can select preset equalizer:

•[User]

•[Techno]

•[Rock]

•[Classic]

•[Jazz]

•[Optimal]

•[Flat]

•[Pop]

Note

•Only when you selected the [USER] equalizer, the Bass/Middle/Treble sound value adjusted can be retained.

1 Press EQ/Audio.

» The current Equalizer setting is displayed.

English

2 Press or to select a preset EQ.

3You can also adjust below settings:

•[BAS]bass range: -7 to +7

•[MID]middle range: -7 to +7.

•[TRE]treble range: -7 to +7

•[LPF] low pass ﬁ lter range: 60, 80, 100, 200.

•[MPF]middle pass ﬁ lter range: 500, 1K, 1.5K, 2.5K.

•[HPF]high pass ﬁ lter range:10K, 12.5K, 15K, 17.5K.

4 Press to exit.

Other sound settings

You can also adjust the front and rear speaker balance, the left and right speaker balance, and subwoofer settings.

1Press EQ/Audio for 3 seconds.

» The following options are displayed:

2 Press or repeatedly to select the item to be adjusted:

•[BAL] balance range: 7Lto 7R. (L = left speaker, R = right speaker)

•[FAD]fader range: 7R to 7F. (R = rear speaker, F = front speaker)

3 Press or to change value, then press .

• You can also turn to select a value.

4 Press to exit.

EN 25

Image 24

Contents Register your product and get support at CED228 Contents Safety Manufactured under license from Dolby LaboratoriesEnvironmental information Your car audio system IntroductionWhat’s in the box Overview of the main unit J ihOverview of the remote control SEL Install the car audio Never connect speaker wires with stripes to one anotherGet started Overview of partsConnect wires ISO connectors Connect wires without ISO connectorsCut off the bigger end of the supplied standard connector Do the other connections, if applicableConnector Connect to Black wire a metal surface of the car Ignition switchIf there is no accessory Connect parking brake cable Connect reverse driving cableAttach the front panel Mount in the dashboardClose the front panel Attach the trim plate5mm Install remote control battery Turn onSelect display language Press the knob to turn on the unitPlay Set clockLoad discs Insert USB device You can play DVD discs with the following region codesAsia Paciﬁ c, Taiwan, Korea Slide down the USB socket coverInsert SD/MMC card Skip/searchIntro play Repeat playSelect audio mode Select audio languageRandom play Select subtitle languageListen to radio ZoomTune to a radio station Store radio stations in memoryTune to a preset station Select tuner sensitivityStore stations manually Play with RDS Activate AF/TA/REG/CT functionsSearch for an RDS station by PTY Information Program typesAdjust settings Adjust soundSelect preset equalizer Press or repeatedly to select the item to be adjustedPress EQ/Audio » The current Equalizer setting is displayed Adjust system settings Adjust general DVD settingsBeeps. You can turn Adjust video DVD settings Adjust display settings Select languageView DivX registration code Write down the number for future reference Press to exitReset OthersListen to other devices Detach the front panelDefault settings Remove the unitReplace fuse Turn on/off the screen backlightGeneral Power supply Negative groundHz 20k Hz Usable sensitivity AM MW 30 uVTroubleshooting Glossary Image ﬂ ashes or distortedMultimediaCard. a type of memory card with a ﬂ ash memory Region code