Philips CED228 Remove the unit, Replace fuse, Turn on/off the screen backlight, Default settings

Page 29

Default settings

Sound		System settings
settings
Equalizer	User	Source	Tuner,
			FM1, 87.5
Bass	0	Demo	Off
Middle	0	Blackout	Off
Treble	0	Key color	Blue
Balance	0	Clock	Current
			time
Fader	0	ESP	45S
LPF	2	Local/Distance	Distance
MPF	2	Beep	On
HPF	2	Stereo/Mono	Stereo
		V-Last/Adj	V-Last
		Volume	20
		Subwoofer	OFF
		Subwoofer	10
		volume
		Pin code	0000
		Auto scroll	On

Remove the unit

To repair or replace the unit, remove it from the dashboard.

1Detach the front panel.

2Remove the unit with the removal keys.

Replace fuse

If there is no power, the fuse may be damaged and need to be replaced.

1Detach the front panel and take out the unit.

2Check the electric connection.

3Buy a fuse that matches the voltage of the damaged fuse (15A)

4Replace the fuse.

If the fuse gets damaged immediately after it has been replaced, there may be an internal malfunction. In such case, consult your Philips dealer.

Turn on/off the screen backlight

To turn on/off the screen backlight of main unit,

•Press and hold SOURCE.

30EN

Image 29

Contents Register your product and get support at CED228 Contents Manufactured under license from Dolby Laboratories SafetyEnvironmental information What’s in the box Your car audio systemIntroduction J ih Overview of the main unitOverview of the remote control SEL Never connect speaker wires with stripes to one another Install the car audioGet started Overview of partsConnect wires without ISO connectors Connect wires ISO connectorsCut off the bigger end of the supplied standard connector Do the other connections, if applicableIf there is no accessory Connector Connect to Black wire a metal surface of the carIgnition switch Connect reverse driving cable Connect parking brake cableMount in the dashboard Attach the front panelClose the front panel Attach the trim plate5mm Turn on Install remote control batterySelect display language Press the knob to turn on the unitLoad discs PlaySet clock You can play DVD discs with the following region codes Insert USB deviceAsia Paciﬁ c, Taiwan, Korea Slide down the USB socket coverSkip/search Insert SD/MMC cardIntro play Repeat playSelect audio language Select audio modeRandom play Select subtitle languageZoom Listen to radioTune to a radio station Store radio stations in memoryStore stations manually Tune to a preset stationSelect tuner sensitivity Activate AF/TA/REG/CT functions Play with RDSSearch for an RDS station by PTY Information Program typesAdjust sound Adjust settingsPress EQ/Audio » The current Equalizer setting is displayed Select preset equalizerPress or repeatedly to select the item to be adjusted Beeps. You can turn Adjust system settingsAdjust general DVD settings Adjust video DVD settings Select language Adjust display settingsView DivX registration code Write down the number for future reference Press to exitOthers ResetListen to other devices Detach the front panelRemove the unit Default settingsReplace fuse Turn on/off the screen backlightNegative ground General Power supplyHz 20k Hz Usable sensitivity AM MW 30 uVTroubleshooting Image ﬂ ashes or distorted GlossaryMultimediaCard. a type of memory card with a ﬂ ash memory Region code