Philips CID3692 user manual Others, Listen to other devices, Reset, Remove the unit

Page 27

10 Others

Listen to other devices

Tip

When air conditioning information changes, the air conditioning information interface will be displayed for 10 seconds.

You can connect an external audio/video device to the unit.

1Connect the device to the unit with the supplied AV cable.

AV IN

Reset

When the unit hangs up, you can reset it.

1Open the MAP/SD card socket cover.

2Press the RESET button with a ball-point pen or similar tool.

Tip

When the unit is reset, all the settings remain unchanged.

English

2Tap to display the main menu.

3Tap [AV-IN1].

4Play the connected device (see the instructions manual of the device).

Tip

If you connect the system to other audio device through the REAR OUT L/R connector (see “Connect wires” section), tap [AV-IN2] to listen to that device.

Remove the unit

To repair, replace fuse, or replace the unit, remove it from the dashboard.

1Screw off the four (4) screws on the left/ right side of the unit.

2Pull the unit out from the dashboard.

EN 27

Image 27
Contents =++.  =+&1  Hazardous/toxic Substance Name PartsContents Safety RecyclingEnvironmental information English Check and identify the contents of your package What’s in the boxIntroduction Overview of the main unit Install the car audio Get startedAlways follow the instructions in this chapter in sequence Connect wires Never connect speaker wires with stripes to one anotherConnect GPS antenna Mount in the dashboard Connect radio antennaAdjust screen Turn onSet date and time Set date Tap Date Upgrade the mapTap on 12Hr or 24Hr to select clock mode Set time Tap Time Use mapListen to radio Tune to a radio stationTune by frequency Store stations manually Tune to a preset stationStore radio stations in memory Select radio rangeInsert USB or SD/MMC card PlayLoad discs Connect USB deviceRemove the SD/MMC card Play/PauseSkip/search Search within a title/folderSelect audio language RepeatRepeat a section Random playZoom Select audio modeSelect subtitle language Rotate picturesDisplayed Play with Bluetooth deviceDisconnect Bluetooth devices Make a callReceive call Listen to music from Bluetooth deviceAdjust Bluetooth settings Switch phone call to the mobileAdjust sound Select preset equalizerMute Set Dynamic Bass Boost DBB Adjust fader/balanceOirt Adjust settingsDisplay system setup menu Adjust general settingsPAL Adjust sound settingsAdjust video settings NtscAdjust language settings Adjust DVD rating Adjust volume settingsRemove the unit ResetOthers Listen to other devicesReplace fuse Product informationAmmw AM MW LCDDVD Device cannot be used with the system to play music TroubleshootingAbout Bluetooth device Image flashes or distortedPaired mobile phone connects and disconnects constantly System is not in the pairing modeSdhc GlossaryMMC MP3