Philips MCM2050 Troubleshooting, No response from the unit, Remote control does not work

Page 20

8 Troubleshooting

Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the following points before

unsolved, go to the Philips web site (www.

Philips, ensure that the apparatus is nearby and the model number and serial number are available.

No power

Ensure that the AC power cord of the unit is connected properly.

Ensure that there is power at the AC outlet.

As a power-saving feature, the system switches off automatically 15 minutes after track play reaches the end and no control is operated.

No sound or poor sound Adjust the volume. Disconnect the headphones.

No response from the unit

Disconnect and reconnect the AC power plug, then turn on the unit again.

Remote control does not work

select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the unit.

Insert the battery with its polarities

Replace the battery.

Aim the remote control directly at the sensor on the front of the unit.

No disc detected

Insert a disc.

Check if the disc is inserted upside down. Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc.

device has exceeded a certain limit.This phenomenon is not a malfunction.

supported.

USB device not supported

The USB device is incompatible with the unit.Try another one.

Poor radio reception

Increase the distance between the unit and your TV or VCR.

Fully extend the FM antenna. Timer does not work

Set the clock correctly. Switch on the timer.

Clock/timer setting erased

Power has been interrupted or the power cord has been disconnected.

Reset the clock/timer.

20EN

Image 20
Contents Register your product and get support at MCM2050 Page Contents Do not mix batteries old and new or Know these safety symbolsDo not place any sources of danger on Hearing Safety What’s in the box Your Micro SystemIntroduction Overview of the main unit Overview of the remote control Placement Prepare the remote controlGet started Connect FM antennaConnect power Press » The unit switches to the last selected sourceSet clock Turn onStore FM radio stations automatically Play Play discPlay from USB Play optionsAdjust sound To mute/restore sound Press To turn dynamic bassDisplay different information Enhancement on/off To select a sound effectListen to FM radio Select stereo/mono broadcast Other features Set the alarm timerSet the sleep timer Play from external audio deviceProduct information USB playability information RDS program typesSupported MP3 disc formats Troubleshooting Remote control does not workReplace or clean the disc No response from the unitThis product complies with the radio Community Human healthRules on separate collection of batteries Because correct disposal helps to preventPage Nederlands
Related manuals
Manual 2 pages 22.17 Kb