Connect power, Prepare the remote control

Open the battery compartment.

Insert 2 AAA batteries with correct polarity (+/-) as indicated.

Close the battery compartment.

3 Release the socket flap.

a b c

Connect power

Caution

•• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.

•• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.

•• Before you connect the AC power cord, make sure that you have completed all other connections.

8EN

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

•• Risk of product damage! When the remote control is not used for long periods, remove the batteries.

•• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

To insert the remote control battery:

Press to turn on.

»»The unit switches to the last selected source.

Tip

•• In standby mode, you can also press CD, TUNER, MP3 LINK to switch on the unit.

Press again to switch the unit to standby mode.

»»The clock (if set) appears on the display panel.