Philips MCM1120 user manual Listen to radio, Tune to FM radio stations, Record from radio to tape

Page 14

5 Load a tape with the open side downward and the full spool to the left, and close the tape door.

6 Press to start recording.

»»Disc play starts automatically from the beginning of the disc or the selected section.

To pause or resume recording, press .

To stop recording, press .

Record from radio to tape

1 Tune to a radio station.

2 Pull to open the tape button cover.

3 Press to open the tape door.

4 Load a tape with the open side downward and the full spool to the left, and close the tape door.

5 Press to start recording.

To pause or resume recording, press .

To stop recording, press .

5 Listen to radio

Tune to FM radio stations

Note

•• Make sure that you have connected and fully extended the supplied FM antenna.

1 Press TUNER.

2 Press / on the remote control or press and hold / on the front panel for two seconds to tune to a radio station.

3 When the frequency starts to change, release the button.

»»The FM tuner tunes to a station with strong reception automatically.

4 Repeat steps 2-3 to tune to more stations.

To tune to a weak station:

Press / repeatedly until you find optimal reception.

Program radio stations automatically

Note

•• You can program a maximum of 20 preset radio stations.

In FM tuner mode, press PROG for 3 seconds to activate automatic programming.

»»[AUTO] (auto) is displayed.

»»The unit stores all the FM radio stations automatically and then broadcasts the first preset radio station.

12EN

Image 14
Contents Always there to help you Register your product and get support atPage Contents Remove batteries when the unit is not used for a long time SafetyImportant Safety Instructions Be careful not to adjust the volume as your hearing adapts Hearing safetyListen at a moderate volume With this unit, you can IntroductionWhats in the box Overview of the main unit Overview of the remote control ModeGet started Connect speakersSwitch to standby mode Connect powerPrepare the remote control Turn on Basic play operations Play Set clock Play discsProgram audio tracks Adjust soundPlay from USB Record from CD to tape Record from radio to tape Listen to radioTune to FM radio stations Synchronize clock with RDS »»If no time signal is received, no CT is displayedProgram radio stations manually Set sleep timer Other featuresSet alarm timer Listen to external audio deviceUSB playability information SpecificationsProduct information Clean the heads and the tape paths MaintenanceClean the disc lens Supported MP3 disc formatsTroubleshooting Environmental information This apparatus includes this labelPage All rights reserved MCM112061UMV2.0