Philips MCM1120 user manual Record from CD to tape

Page 13
4 Press / to select a track number, then press PROG to confirm.
5 Repeat steps 3 and 4 to program more tracks.
6 Press to play the programmed tracks. »»During play, [PROG] (program) is
displayed.
»»To erase the program, press when play is stopped.
Listen to tape
Note
•• When you play or record a tape, the sound source cannot be changed.
•• To record, use only "Normal" (IEC type I) tapes on which the write-protect notches (tabs) are not broken.
Play a tape

1 Press TAPE to select the tape source, and pull to open the tape button cover on the front.

2 Press to open the tape door.

3 Load a tape with the open side downward and the full spool to the left, and close the tape door.

4 Close the tape door.

5 Press to start play.

To pause or resume play, press .

To stop the play, press .

To fast rewind or wind the tape, press / .

Record from CD to tape

1

Press CD to select the CD source.

2

Load a disc.

 

• To record from the beginning of the

 

disc, stop disc play from the beginning.

 

• To record a section of the disc, stop

 

disc play from the beginning of the

3

section.

Pull to open the tape button cover on the

4

front.

 

 

Press

 

to open the tape door.

 

 

EN 11

Image 13
Contents Register your product and get support at Always there to help youPage Contents Important Safety Instructions SafetyRemove batteries when the unit is not used for a long time Listen at a moderate volume Hearing safetyBe careful not to adjust the volume as your hearing adapts Whats in the box IntroductionWith this unit, you can Overview of the main unit Mode Overview of the remote controlConnect speakers Get startedPrepare the remote control Connect powerSwitch to standby mode Turn onSet clock PlayBasic play operations Play discsPlay from USB Adjust soundProgram audio tracks Record from CD to tape Tune to FM radio stations Listen to radioRecord from radio to tape Program radio stations manually »»If no time signal is received, no CT is displayedSynchronize clock with RDS Set alarm timer Other featuresSet sleep timer Listen to external audio deviceProduct information SpecificationsUSB playability information Clean the disc lens MaintenanceClean the heads and the tape paths Supported MP3 disc formatsTroubleshooting This apparatus includes this label Environmental informationPage All rights reserved MCM112061UMV2.0