»»Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)...
»»Radio text »»Frequency
Press RDS repeatedly to scroll through the following information (if available):
»»Station name
Tune to an RDS station.
RDS (Radio Data System) is a service that allows FM stations to show additional information. If you tune to an RDS station, an RDS icon and the station name are displayed.
1
2
4 Repeat steps 2-3 to program other stations.
Note
•• To overwrite a programmed station, store another station in its place.
Show RDS information
Program radio stations manually
Note
•• You can program a maximum of 20 preset radio stations.
1 Tune to a radio station.
2 Press PROG to activate programming mode.
3 Press ALB/PRESET+/- to select a number from 1 to 20 for this radio station, then press PROG to confirm.
»»The preset number and the frequency of the preset station are displayed.
Synchronize clock with RDS
You can synchronize time shown on the unit with that on the RDS station.
1 Tune to a RDS radio station that transmits time signals.
2 Press RDS for over 2 seconds.
»»[CT SYNC] is displayed and the unit reads RDS time automatically.
»»If no time signal is received, [NO CT] is displayed.
Note
•• The accuracy of the transmitted time depends on the RDS station that transmits the time signal.
EN 13