Other features, Set the alarm timer | Philips MCD2160 specification

Make sure that the external audio device is connected to this device. (see 'Connect an external audio device' on page 8)

Press FM/AUX repeatedly to select AUX source.

Start to play the external device (see the device user manual).

8 Other features

This unit can be used as an alarm clock.You can select CD, FM, or USB as alarm source.

Note

•• Make sure that you have set the clock correctly.

1 In standby mode, press and hold TIME/ SLEEP for more than two seconds.

»»The hour digits are displayed and begin to blink.

2 Press / (or +/-) repeatedly to set hour, and then press TIME/SLEEP.

»»The minute digits are displayed and begin to blink.

3 Repeat step 2 to set minute, select a source (disc, USB, or tuner), and adjust volume.

Note

•• If no button is pressed in 90 seconds, the system exits timer setting mode automatically.

To activate or deactivate the alarm timer: Press TIME/SLEEP repeatedly to activate or deactivate the alarm.

»»If timer is activated, is displayed.

Tip

•• If disc/USB source is selected, but no disc is placed or no USB connected, the system switches to the tuner source automatically.

To set the sleep timer, in turn on mode, press TIME/SLEEP repeatedly to select a set period of time (in minutes).

»»When sleep timer is activated, is displayed.

To deactivate sleep timer:

Press TIME/SLEEP repeatedly until [SLP OFF] (sleep off) is displayed.

»»When sleep timer is deactivated, disappears.

You can listen to an external device through this unit with an MP3 link cable (not supplied).

17EN