Note
•• The unit switches to Eco Power Standby mode after 15 minutes in standby mode.
Switch between standby mode and ECO standby mode:
Press and hold 
for more than two seconds.
Find the correct viewing channel
1 Press DISC to switch to disc mode.
2 Turn on the TV and switch to the correct
•Go to the lowest channel on your TV, and then press the Channel Down button until you see the blue screen.
•Press the source button repeatedly on the remote control of your TV.
Tip
•• The
Select the correct TV system
Change this setting if the video is not displayed correctly. By default, this setting matches the most common setting for TVs in your country.
1 Press 
.
2
3 Select a setting and press OK.
•[PAL] (PAL) - For TV with PAL color system.
•[Multi] (Multi) - For TV that is compatible with both PAL and NTSC.
•[NTSC] (NTSC) - For TV with NTSC color system.
4 To return to the previous menu, press 
. 5 To exit the menu, press 
.
Change system menu language
1 Press 
.
2 Select [Setup] (Setup)
3 Select a setting and then press OK.
4 To exit the menu, press 
.
Turn on Progressive Scan
Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.
Before you turn on this feature, make sure that:
• | the TV supports progressive scan signals. |
• | you have connected the unit with the TV |
1 | through component video. |
Turn on the TV. | |
2 | Make sure that the TV progressive scan |
| mode is deactivated (see the TV user |
3 | manual). |
Switch the TV to the correct viewing | |
4 | channel for this unit. |
Press DISC, and then press . | |
5 | Select [Setup] (Setup) |
»»The progressive setup is complete.
11EN