Adjust settings, General setup, Video setup

9 Adjust settings

1 Press .

2 Select the [Setup] (Setup) page.

3 Select a setting and press OK.

•To return to the previous menu, press

•To exit the menu, press .

General setup

On the [General] (general) page, you can set the following options:

[Disc Lock] (disc lock) Lock or unlock a disc.

[OSD Language] (OSD language)

Select the preferred language for on-screen display.

[DivX(R) VOD Code] (DivX(R) VOD Code) Display the DivX(R) registration code.

Note

•• Enter this DivX registration code when you rent or purchase a video from http://vod.divx.com/.The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Video setup

On the [Video] (Video) page, you can set the following options:

[TV System] (TV System)

Change this setting if the video is not displayed correctly. By default, this setting matches the most common setting for TVs in your country.

•[PAL] (PAL) - For TV with PAL color system.

•[Multi] (Multi) - For TV that is compatible with both PAL and NTSC.

•[NTSC] (NTSC) - For TV with NTSC color system.

[TV Display] (TV Display)

The TV format determines the aspect ratio of display according to the type of TV you have connected.

4:3 Pan Scan (PS)

4:3 Letter Box (LB)

16:9 (Wide Screen)

•[4:3 Pan Scan] (4:3 Pan Scan) – For 4:3 screen TV: full-height display with the trimmed sides.

•[4:3 Letter Box] (4:3 Letter Box) – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen.

•[16:9] (16:9 Wide Screen) – For wide- screen TV: display ratio 16:9.

[Progressive] (Progressive)

Set the video output according to the video connection. If the composite connection is used, this setting is not required.

•[On] (On) – turn on progressive scan.

•[Off] (Off) – turn off progressive scan.

[Picture Setting] (Picture Setting)

Select a predefined set of picture color settings.

•[Standard] (Standard) – Original color setting.

•[Bright] (Bright) – Vibrant color setting.

•[Soft] (Soft) - Soft color setting.

•[Personal] (Personal) – Customizes the color setting. Set the level of brightness, contrast, tint, and color saturation, and then press OK.

Audio setup

On the [Audio] (Audio) page, you can set the following options:

EN 18