Setup
Please check the battery of Remote Control first, and then start the initial setup.
Initial setup
When plugged in the power at the first time, after the booting logo, the setup page should display to start the initial setting. The first item is the menu language. Please setup the menu language for OSD. Use ▲▼ button to select the language and press “ENTER” to confirm.
Note: Before beginning this process, if you want to connect HDMI, please connect it first and then start the configuration.
The second item is to choose the resolution of the video output according to your TV set and the connection between this play and TV set.
zFor HDMI TV set, the device detects the available resolution of your TV set and lists them on screen. In the list of resolution, the available option is in white characters and the unsupported one is in dark characters. We recommend you to select the option “HDMI Auto” which enables the maximum resolution on your TV set.
zFor YPbPr output, the supported resolution is up to 1080i so select “1080i 50Hz” for PAL TV set or “1080i 60Hz” for NTSC TV set for the maximum resolution. For TV set that doesn’t support HD input, select “NTSC” or “PAL” for the SD video.
zFor CVBS output, choose “NTSC” for NTSC TV set or “PAL” for PAL TV set.
Note: The CVBS is always output SD video no matter which resolution is chosen.
8
