Olevia ZP-500 manual Maintenance, Reset the device, Power on/Standby time, Battery, Black screen

Maintenance

Reset the device

You can press “MENU” to open the setup menu. To Reset the device, navigate to Setup menu and select “Restore Default” and press “ENTER”. Please refer to setup section for the details.

Power on/Standby time

The device needs sometime to power on. The time costs are listed below. Plug in the power -> power on and ready to use: it takes about 15 seconds.

Power on status -> Standby mode by pressing the power button: it takes about 15 seconds.

Standby mode -> power on mode by pressing the power button: it takes about 8 seconds. In this short time, the remote control unit and the power button are not functional.

Battery

When the distance of remote control is dropped dramatically, please replace the new battery for the remote control.

Black screen

If you get black screen while starting to play Movie or Photo files, please check the connection from TV to the device and the resolution. For YPbPr, the maximum resolution is 1080i. Press “resolution” key to change the resolution until the screen displays. For HDMI connection, select “HDMI Auto” to detect the resolution of TV set automatically. For CVBS, it always output SD 480i/576i so you can change to CVBS to check the setting of player.

41