Wireless LAN setup: Before configuring the WLAN network, insert the USB 802.11n
Profile
WLAN mode
WLAN Setup
Security Setup
IP Setup
Connection
Profile
Infra AP
Peer to Peer Ad Hoc
Get SSID (Scan WLAN)
1.Setup SSID
2.Security
Enter the key
Enter the key
DHCP FIX IP
FIX IP
OK
OK
Profile: Choose one profile to edit or apply. The saved profile can be applied later. To apply the profile, choose it and press blue key to apply. In the first setting, choose “Connection 1” and press “ENTER” key to continue.
Connection: Select either to use “Infrastructure (AP)” or “Peer to Peer (Ad Hoc)”. The Infrastructure mode requires an Access Point to access and the Ad Hoc mode is for the dongle to dongle network.
The procedure divides into two ways here. Infrastructure AP Mode:
Get SSID: select one SSID which is the network name for AP and then press “Enter” to continue.
Signal Strength: in this page, you can find the signal strength for every SSID. Adjust the position, angle of the dongle or AP to get the high signal strength.
13
