Adjust the volume, Choose your sound, MP3 player

Apply factory settings

You can reset your SoundBar to the default settings programmed at the factory.

1 In mute mode, quickly press AUX twice.

»»The factory settings is restored.

Auto standby

When playing media from a connected device, the SoundBar automatically switches to standby if:

• no button is pressed for 30 minutes, and

• no audio play from a connected device.

This section helps you use the SoundBar to play audio from connected devices.

Before you start

•Make the necessary connections described in the quick start guide and the user manual.

•Switch the SoundBar to the correct source for other devices.

Adjust the volume

1 Press VOLUME +/- to increase or decrease a volume level.

•To mute sound, press (MUTE).

•To restore the sound, press (MUTE) again or press VOLUME +/-.

»»All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value.

This section helps you choose the ideal sound for your video or music.

Experience an immersive audio experience with surround sound modes.

1 Press SURR to select a surround mode.

•[Virtual Surround]: Creates a highly surround listening experience The SURR indicator on the main unit lights up.

•[Stereo]:Two-channel stereo sound. Ideal for listening to music.

Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.

»»All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value.

Connect your MP3 player to play your audio files or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO-IN connector on your SoundBar.

2 Press AUDIO-IN.

3 Press the buttons on the MP3 player to select and play audio files or music.