Philips HTL2100G, HTL2100B, HTL2100C, HTL2100S Troubleshooting, No sound from SoundBar speakers

Page 11

7 Troubleshooting

Warning

•• Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support.

Sound

No sound from SoundBar speakers.

Connect the audio cable from your SoundBar to your TV or other devices.

Reset your SoundBar to its factory settings.

On the remote control, select the correct audio input.

Make sure that the SoundBar is not muted.

Distorted sound or echo.

If you play audio from the TV through the SoundBar, make sure that the TV is muted.

11EN

Image 11
Contents Register your product and get support at Always there to help youContents Risk of swallowing batteries SafetyRisk of electric shock or fire Care of the environment Use only microfiber cloth to clean the productMains fuse Care for your productMain unit Remote controlYour SoundBar Side right ConnectorsRear connectors Option 2 Connect audio through a digital coaxial cable ConnectConnect audio from TV and other devices Option 1 Connect audio through a digital optical cableMP3 player Adjust the volumeSurround sound mode Choose your soundScrew length/diameter Wall mountMain unit Remote control batteriesAmplifier AudioNo sound from SoundBar speakers TroubleshootingSound This section contains the legal and trademark notices ComplianceTrademarks HTL210012UMV7.0