Sharp XL-BD601PH USB Memory Management, Software Update Settings, Auto Update from Network, Setup

Settings (continued)

Before using the USB memory device

Caution:

●Do not remove the USB memory device or unplug the AC power lead while the operations for “USB Memory Management” or “Software Update Settings (Manual Update from USB memory device)” are being performed.

●Do not use a USB extension cable when connecting a USB memory device to the USB1 terminal.

–Using a USB extension cable may prevent the unit from performing correctly.

Notes:

●SHARP cannot guarantee that all brands’ USB memory devices will operate with this unit.

●Only USB memory devices formatted with FAT 32/16 are compatible.

When formatting a USB memory device using a PC, perform the following settings.

Format File System: FAT32

Allocation Unit Size: Default Allocation Size

■USB Memory Management

The following instructions explain how to delete data such as the Virtual Package data and the BD-LIVE data in a USB memory device.

Note:

●A USB memory device can be used only with USB1 terminal.

Rear

USB1 terminal

	USB memory device
2� Press ON/STAND-BY to turn on the power.
3� Press	/ to select “Settings”, then press or ENTER.
4� Press	/ to select “USB Memory Management”, then press

or ENTER.

●The “USB Memory Management” screen is displayed.

●“No USB Memory” appears when no USB memory is inserted.

5� Press / to select “Erase” or “Format”, then press ENTER. Erase: Deletes only BD-VIDEO data written on the USB memory device such as BD-LIVE data.

Format: Be aware that all data including BD-VIDEO data and software update data will be deleted.

●If you want to delete only the unneeded software update data after the software is updated, delete the data on the USB memory device using a PC.

8� Press ENTER.

9� Press HOME or EXIT to exit.

Note:

Data which has been saved to the unit’s internal memory (game score, etc.) will also be deleted.

■Software Update Settings

In this unit, the software version can be updated using either one of the following methods.

●Auto Update from Network

●Manual Update from Network

●Manual Update from USB memory device

Auto Update from Network

This function allows you to perform the update by accessing an Internet connection automatically to check if there is a new firmware version every time the unit is turned on.

When using this function, it is required to perform the following settings in advance.

Notes:

●Make sure that the LAN cable is connected to this unit.

●Make sure to perform the communication settings. (See pages 29 –30.)

●It may take time to access and download the update depending on the Internet connection and other factors.

Caution:

●Do not remove the LAN cable or unplug the AC power lead while downloading or updating software.

When you insert or remove a USB memory device, be sure to turn the main power off and make sure that “Quick Start” is set to “No” (See page 28).

� Insert the USB memory device into the USB terminal on this unit.

Erase	Erases BD-VIDEO data on USB memory.
	Erase all contents on USB memory
Format
	including protected contents.

6� Press / to select “Yes”, then press ENTER.

●A confirmation message is displayed. Check that the correct USB memory device is displayed, and then continue.

7� Start the process.

●The screen for the current operation will display.

Complete

OK

Setup

� Press / to select “Settings”, then press or ENTER.

2� Press / to select “Software Update Settings”, then press or ENTER.

3� Press / to select “Auto Update Setting”, then press or

ENTER.

4� Press / to select “Yes”, then press ENTER.

●After this, an Internet connection will be made automatically every time this unit is turned on.

E-31