Kenwood TM-V708A instruction manual Automatic Repeater Offset

Page 35

AUTOMATIC REPEATER OFFSET

This function automatically selects an offset direction, according to the frequency that you select on the VHF band. The transceiver is programmed for offset direction as shown below. To obtain an up-to-date band plan for repeater offset direction, contact your national Amateur Radio association.

This complies with the standard ARRL band plan.

144.0		145.5		146.4		147.0		147.6
145.1			146.0		146.6		147.4		148.0 MHz

	S	−	S	+	S	−	+	S	−

S: Simplex

Note: Automatic Repeater Offset does not function when Reverse is ON. However, pressing [REV] after Automatic Repeater Offset has selected an offset (split) status, exchanges the receive and transmit frequencies.

1Press [MNU] to enter Menu mode.

2Press [c]/ [d] to select “REPEATER (1–7–)”, then press [OK].

3Press [c]/ [d] to select “AUTO OFFSET (1–7–2)”, then press [OK].

4Press [c]/ [d] to switch the function ON (default) or OFF.

5Press [OK] to complete the setting.

6Press [MNU] to exit Menu mode.

Image 35

Contents TM-V708A Thank YOU FeaturesOne or more of the following statements may be applicable When condensation occurs inside the transceiverContents Locking Out a Memory Channel Selecting the Number of Channels Using Visual ScanSetting Scan Limits Using Program Scan Recalling the Call Channel Reprogramming the Call ChannelPacket Operation Conventions Followed in this Manual Supplied AccessoriesPreparation Mobile InstallationMain Unit Installation Slide the front panel down until its locking tab clicks Front Panel InstallationModular Plug Cable Connection Fixed Station InstallationMobile Operation DC Power Cable ConnectionFixed Station Operation Fuse Location Fuse Current Rating Transceiver 15 a Supplied Accessory 20 a DC Power CableAntenna Connection Replacing FusesMicrophone Accessory ConnectionsExternal Speakers Ewwew w Your First QSOFront Panel Getting Acquainted3SQL control Main Unit Front Microphone Indicators Menu mode VFO modeMemory Recall mode Programmable Memory PM modeKEY Function Display Control Band Band a & BTX Band and Control Band TX BandMIC Keypad Direct Entry MC-58DM only Selecting a Band Switching the Power ON/OFFAdjusting the Volume Operating BasicsSelecting a Frequency Adjusting the SquelchPress VFO to select VFO mode Transmitting Selecting Output PowerWhen you finish speaking, release Mic PTT Menu Access Menu SetupLevel Selections Default Menu ConfigurationMemory channel name See reference Number Store Auto PM Channel StoreChannel Display Memory Channel LockoutAcknowledgement Automatic Power Off APORemote Control Offset Programming Flow Operating Through RepeatersPress c / d to select Repeater Then press OK Programming OffsetSelecting Offset Direction Selecting Offset FrequencyPress F, T.SEL Activating Tone FunctionSelecting a Tone Frequency Press Tone to activate the Tone functionAutomatic Repeater Offset Press c/ d to select TX Hold 1-7-4, then Transmitting a 1750 Hz ToneAutomatic Simplex Check ASC Press REV to switch the Reverse function on or OFFReverse Function Press Scan to activate the Tone Frequency ID Tone Frequency IDParameter Simplex Odd-split Memory ChannelsSimplex & Repeater or ODD-SPLIT Memory CHANNEL? Select your desired transmit frequency Press M.IN Storing ODD-SPLIT Repeater FrequenciesPress M.IN 1 s Clearing a Memory Channel Select band a or B Press MR to enter Memory Recall modePress MHz Tuning control+ Power on Recalling a Memory ChannelRepeat steps 5 and 6 to enter up to 8 digits Turn the Tuning control to select the first digitNaming a Memory Channel Press aPress VFO Call ChannelRecalling the Call Channel Reprogramming the Call ChannelChannel Display MEMORY-TO-VFO TransferParameter Band a Band B Partial or Full RESET?Programmable Information Programmable Memory PMSituationit ti Application ExamplesPress F, P.IN Storing in PM ChannelsRecalling a PM Channel Auto PM Channel Store PM Channel ResetPress PM+ Power on Scan Type Scan Range ScanSelecting the Number of Channels Mode 1 31 chMode 2 61 ch Visual ScanTo exit Visual Scan, press ESC Using Visual ScanPress F, Visual to start Visual Scan Selecting Scan Resume Method Time-Operated modeCarrier-Operated mode Seek modeSelect band a or B VFO ScanMemory Scan Press VFO 1 sTo exit Group Scan, press MHz again Press MHz Tuning control 1 sGroup Scan Locking Out a Memory ChannelSelect your desired frequency for the lower limit Press F Setting Scan LimitsProgram Scan To exit MHz Scan, press MHz again Using Program ScanSelect the appropriate band To exit Program Scan, press VFO againTo exit Call/Memory Scan, press Call again CALL/VFO ScanCALL/MEMORY Scan To exit Call/VFO Scan, press Call againPress Tone to activate the Ctcss function Using CtcssContinuous Tone Coded Squelch System Ctcss Press the left or right Band SEL to select band a or BPress Scan to activate the Ctcss Frequency ID Ctcss Frequency IDPress Tone to activate the DCS function Using DCSDigital Code Squelch DCS Press Scan to activate the DCS Code ID DCS Code IDFreq. Hz 1209 1336 1477 1633 Manual DialingDtmf Monitor Repeat steps 4 and 5 to enter up to 8 digits Turn the Tuning control to select a characterAutomatic Dialer Storing a Dtmf Number in MemorySelecting Pause Duration Transmitting a Stored Dtmf NumberSelecting TX Speed VFO PF3 Programmable Function PF KeysPF PF1 MR PF2Press the numeric keys in sequence on the keypad Auxiliary FunctionsPress VFO Press Mic Enter Press c/ d to select your desired step size Changing Frequency Step SizeProgrammable VFO Press VFO Press F, StepPOSITIVE/ Negative Reversal Display Contrast AdjustDisplay Dimmer Auto Dimmer ChangeAutomatic Band Change ABC Blanking a Band DisplayALL-CONTROL Lock PWR switch MHz SQL controls VOL controlsPress MNU to exit Menu mode Transceiver LockSquelch Hang Time Changing Beep VolumeSwitching FM/AM Mode KEY Beep ON/ OFFAdvanced Intercept Point AIP TIME-OUT Timer TOTAutomatic Power OFF APO Intermodulation and Sensitivity AdjustmentsRepeat steps 3 and 4 to enter up to 8 digits POWER-ON MessageDisplay Demonstration 14 4 Press aSpeaker Mute Changing Speaker ConfigurationsConnection Mode Band a Band B Packet Operation Function Connecting with a TNC and Personal ComputerSelecting a Data Transfer Rate Key Microphone Control with MC-58DM onlyPreparation Wireless Remote ControlSelect the receive frequency on band B UHF Access Menu 1-A-3 Control and select onControl Operation Repeater Function Band SEL VS-3 Voice Synthesizer OptionalPG-5A MC-45 Optional AccessoriesPS-33 SP-50B VS-3 PG-2N PG-3B PG-4XReplace the lower cover 6 screws Installing OptionsInstalling the PG-4X Extension Cable KIT Remove the 6 screws from the lower cover of the main unitConnections Using Two PG-4X Kits Connections Using One PG-4X KitCleaning MaintenanceService Service NoteProblem Probable Cause Corrective Action TroubleshootingVHF Band UHF Band SpecificationsTransmitter Index

TM-V708A specifications

The Kenwood TM-V708A is a versatile and powerful dual-band transceiver that caters to amateur radio enthusiasts seeking advanced communication capabilities. Designed for operation in the 144 MHz and 440 MHz bands, this mobile radio provides exceptional performance in various modes, making it ideal for both casual users and serious operators alike.

One of the standout features of the TM-V708A is its ability to operate in both VHF and UHF frequencies simultaneous, enabling users to monitor multiple channels at once. With a powerful output of up to 50 watts on VHF and 35 watts on UHF, the TM-V708A ensures strong, clear signals that can reach distant stations. The user-friendly interface includes a large display that provides clear readings of the frequency and other operational parameters, enhancing the overall experience for operators.

The Kenwood TM-V708A is equipped with advanced digital signal processing (DSP) technology. This feature minimizes background noise, ensuring that voice communications remain crystal clear even in challenging conditions. The built-in CTCSS and DCS capabilities add further functionality, allowing for selective calling and improved privacy during conversations.

This transceiver comes with a wide range of operating modes. It supports FM, AM, and SSB, providing flexibility based on operator preference and environmental conditions. Furthermore, the inclusion of APRS (Automatic Packet Reporting System) capabilities allows for real-time tracking and position reporting, making it an excellent tool for emergencies and outdoor adventures.

Another notable characteristic is its built-in memory. The TM-V708A can store a substantial number of memory channels, allowing users to quickly access their preferred frequencies. Additionally, the dual-receive function permits the monitoring of two different frequencies simultaneously, providing seamless communication in dynamic environments.

For enhanced usability, the TM-V708A includes multiple connectivity options. It features a variety of ports for connecting external equipment, allowing operators to customize their setup according to their specific needs. The unit also balances robust performance with portability, making it suitable for both mobile and stationary use.

In summary, the Kenwood TM-V708A is a powerful and feature-rich transceiver that combines advanced technologies and user-friendly design. Its dual-band capabilities, robust power output, and extensive operational modes make it an invaluable tool for amateur radio operators seeking to enhance their communication experience. Whether for casual chatting or emergency response, the TM-V708A stands as a premier choice in the market.