Kenwood TM-V708A Changing Speaker Configurations, Speaker Mute, Connection Mode Band a Band B

Page 75

CHANGING SPEAKER CONFIGURATIONS

This transceiver has two speaker jacks. You can enjoy a variety of speaker configurations by using one or two external speakers.

Access Menu 1–2–3 (SPEAKER) and select mode 1 (default) or 2, depending on how you want the internal and/or external speakers to function.

Connection

Mode

Band A

Band B

 

 

 

 

Only SP1 jack is

Mode 1

External

External

connected to an

 

 

 

Mode 2

External

External

external speaker

 

 

 

 

Only SP2 jack is

Mode 1

External

Internal

connected to an

 

 

 

Mode 2

Internal

External

external speaker

 

 

 

 

Both SP1 and SP2

Mode 1

External 2

External 1

jacks are

 

 

 

connected to

 

 

 

Mode 2

External 1

External 2

external speakers

 

 

 

 

 

 

 

SPEAKER MUTE

While receiving or transmitting on the TX band, you may not want to hear audio received on the other band. Use this function to mute the speaker allocated to that band (not the TX band).

Press [MUTE] to switch this function ON (or OFF).

• “MUTE” appears when this function is ON.

14

69

Page 74 Page 76
Image 75
Page 74 Page 76
Contents TM-V708A Thank YOU FeaturesOne or more of the following statements may be applicable When condensation occurs inside the transceiverContents Locking Out a Memory Channel Selecting the Number of Channels Using Visual ScanSetting Scan Limits Using Program Scan Recalling the Call Channel Reprogramming the Call ChannelPacket Operation Conventions Followed in this Manual Supplied AccessoriesMobile Installation Main Unit InstallationPreparation Slide the front panel down until its locking tab clicks Front Panel InstallationModular Plug Cable Connection Fixed Station InstallationMobile Operation DC Power Cable ConnectionFixed Station Operation Fuse Location Fuse Current Rating Transceiver 15 a Supplied Accessory 20 a DC Power CableAntenna Connection Replacing FusesAccessory Connections External SpeakersMicrophone Ewwew w Your First QSOFront Panel Getting Acquainted3SQL control Main Unit Front Microphone Indicators Menu mode VFO modeMemory Recall mode Programmable Memory PM modeKEY Function Display Control Band Band a & BTX Band and Control Band TX BandMIC Keypad Direct Entry MC-58DM only Selecting a Band Switching the Power ON/OFFAdjusting the Volume Operating BasicsAdjusting the Squelch Press VFO to select VFO modeSelecting a Frequency Selecting Output Power When you finish speaking, release Mic PTTTransmitting Menu Access Menu SetupLevel Selections Default Menu ConfigurationMemory channel name See reference Number Store Auto PM Channel StoreChannel Display Memory Channel LockoutAutomatic Power Off APO Remote ControlAcknowledgement Offset Programming Flow Operating Through RepeatersPress c / d to select Repeater Then press OK Programming OffsetSelecting Offset Direction Selecting Offset FrequencyPress F, T.SEL Activating Tone FunctionSelecting a Tone Frequency Press Tone to activate the Tone functionAutomatic Repeater Offset Press c/ d to select TX Hold 1-7-4, then Transmitting a 1750 Hz TonePress REV to switch the Reverse function on or OFF Reverse FunctionAutomatic Simplex Check ASC Press Scan to activate the Tone Frequency ID Tone Frequency IDMemory Channels Simplex & Repeater or ODD-SPLIT Memory CHANNEL?Parameter Simplex Odd-split Storing ODD-SPLIT Repeater Frequencies Press M.IN 1 sSelect your desired transmit frequency Press M.IN Clearing a Memory Channel Select band a or B Press MR to enter Memory Recall modePress MHz Tuning control+ Power on Recalling a Memory ChannelRepeat steps 5 and 6 to enter up to 8 digits Turn the Tuning control to select the first digitNaming a Memory Channel Press aPress VFO Call ChannelRecalling the Call Channel Reprogramming the Call ChannelChannel Display MEMORY-TO-VFO TransferParameter Band a Band B Partial or Full RESET?Programmable Information Programmable Memory PMSituationit ti Application ExamplesStoring in PM Channels Recalling a PM ChannelPress F, P.IN PM Channel Reset Press PM+ Power onAuto PM Channel Store Scan Type Scan Range ScanSelecting the Number of Channels Mode 1 31 chMode 2 61 ch Visual ScanUsing Visual Scan Press F, Visual to start Visual ScanTo exit Visual Scan, press ESC Selecting Scan Resume Method Time-Operated modeCarrier-Operated mode Seek modeSelect band a or B VFO ScanMemory Scan Press VFO 1 sTo exit Group Scan, press MHz again Press MHz Tuning control 1 sGroup Scan Locking Out a Memory ChannelSetting Scan Limits Program ScanSelect your desired frequency for the lower limit Press F To exit MHz Scan, press MHz again Using Program ScanSelect the appropriate band To exit Program Scan, press VFO againTo exit Call/Memory Scan, press Call again CALL/VFO ScanCALL/MEMORY Scan To exit Call/VFO Scan, press Call againPress Tone to activate the Ctcss function Using CtcssContinuous Tone Coded Squelch System Ctcss Press the left or right Band SEL to select band a or BPress Scan to activate the Ctcss Frequency ID Ctcss Frequency IDUsing DCS Digital Code Squelch DCSPress Tone to activate the DCS function Press Scan to activate the DCS Code ID DCS Code IDManual Dialing Dtmf MonitorFreq. Hz 1209 1336 1477 1633 Repeat steps 4 and 5 to enter up to 8 digits Turn the Tuning control to select a characterAutomatic Dialer Storing a Dtmf Number in MemoryTransmitting a Stored Dtmf Number Selecting TX SpeedSelecting Pause Duration VFO PF3 Programmable Function PF KeysPF PF1 MR PF2Auxiliary Functions Press VFO Press Mic EnterPress the numeric keys in sequence on the keypad Press c/ d to select your desired step size Changing Frequency Step SizeProgrammable VFO Press VFO Press F, StepPOSITIVE/ Negative Reversal Display Contrast AdjustDisplay Dimmer Auto Dimmer ChangeAutomatic Band Change ABC Blanking a Band DisplayALL-CONTROL Lock PWR switch MHz SQL controls VOL controlsPress MNU to exit Menu mode Transceiver LockSquelch Hang Time Changing Beep VolumeSwitching FM/AM Mode KEY Beep ON/ OFFAdvanced Intercept Point AIP TIME-OUT Timer TOTAutomatic Power OFF APO Intermodulation and Sensitivity AdjustmentsRepeat steps 3 and 4 to enter up to 8 digits POWER-ON MessageDisplay Demonstration 14 4 Press aChanging Speaker Configurations Connection Mode Band a Band BSpeaker Mute Packet Operation Function Connecting with a TNC and Personal ComputerSelecting a Data Transfer Rate Key Microphone Control with MC-58DM onlyPreparation Wireless Remote ControlAccess Menu 1-A-3 Control and select on Control OperationSelect the receive frequency on band B UHF Repeater Function Band SEL VS-3 Voice Synthesizer OptionalPG-5A MC-45 Optional AccessoriesPS-33 SP-50B VS-3 PG-2N PG-3B PG-4XReplace the lower cover 6 screws Installing OptionsInstalling the PG-4X Extension Cable KIT Remove the 6 screws from the lower cover of the main unitConnections Using Two PG-4X Kits Connections Using One PG-4X KitCleaning MaintenanceService Service NoteProblem Probable Cause Corrective Action TroubleshootingVHF Band UHF Band SpecificationsTransmitter Index

TM-V708A specifications

The Kenwood TM-V708A is a versatile and powerful dual-band transceiver that caters to amateur radio enthusiasts seeking advanced communication capabilities. Designed for operation in the 144 MHz and 440 MHz bands, this mobile radio provides exceptional performance in various modes, making it ideal for both casual users and serious operators alike.

One of the standout features of the TM-V708A is its ability to operate in both VHF and UHF frequencies simultaneous, enabling users to monitor multiple channels at once. With a powerful output of up to 50 watts on VHF and 35 watts on UHF, the TM-V708A ensures strong, clear signals that can reach distant stations. The user-friendly interface includes a large display that provides clear readings of the frequency and other operational parameters, enhancing the overall experience for operators.

The Kenwood TM-V708A is equipped with advanced digital signal processing (DSP) technology. This feature minimizes background noise, ensuring that voice communications remain crystal clear even in challenging conditions. The built-in CTCSS and DCS capabilities add further functionality, allowing for selective calling and improved privacy during conversations.

This transceiver comes with a wide range of operating modes. It supports FM, AM, and SSB, providing flexibility based on operator preference and environmental conditions. Furthermore, the inclusion of APRS (Automatic Packet Reporting System) capabilities allows for real-time tracking and position reporting, making it an excellent tool for emergencies and outdoor adventures.

Another notable characteristic is its built-in memory. The TM-V708A can store a substantial number of memory channels, allowing users to quickly access their preferred frequencies. Additionally, the dual-receive function permits the monitoring of two different frequencies simultaneously, providing seamless communication in dynamic environments.

For enhanced usability, the TM-V708A includes multiple connectivity options. It features a variety of ports for connecting external equipment, allowing operators to customize their setup according to their specific needs. The unit also balances robust performance with portability, making it suitable for both mobile and stationary use.

In summary, the Kenwood TM-V708A is a powerful and feature-rich transceiver that combines advanced technologies and user-friendly design. Its dual-band capabilities, robust power output, and extensive operational modes make it an invaluable tool for amateur radio operators seeking to enhance their communication experience. Whether for casual chatting or emergency response, the TM-V708A stands as a premier choice in the market.
Top Page Image Contents