SPECIAL APPLICATION
Command Format: [CONTRyyCi]
yy= Level (yy = # from 00 to 48, default=40) Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [CONTR20] to set the output contrast to 20.
18.[CONTR]
This command displays the current contrast level and makes the contrast function active for adjustments. See the [+] and
Command Format: [CONTRCi]
Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [CONTR]. The unit will display the current contrast level, for example “[20]”. The contrast feature is now active and the [+] and
19.[COLORn]
This command sets the color level to an absolute value.
Command Format: [COLORyyCi]
yy= Level (yy = # from 00 to 48, default=24) Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [COLOR25] to set the output color to 25.
20.[COLOR]
This command displays the current color level and makes the color function active for adjustments. See the [+] and
Command Format: [COLORCi]
Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [COLOR]. The unit will display the current color level, for example “[25]”. The color feature is now active and the
[+]and
21.[SHARPn]
This command sets the sharpness level to an absolute value.
Command Format: [SHARPyyCi]
yy= Level (yy = # from 00 to 48,default=10) Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [SHARP20] to set the output sharpness to 20.
22.[SHARP]
This command displays the current sharpness level and makes the sharpness function active for adjustments. See the [+] and
Command Format: [SHARPCi]
Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [SHARP]. The unit will display the current sharpness level, for example “[20]”. The sharpness feature is now active and the [+] and
23.[HUEn]
This command sets the hue level to an absolute value.
NOTE: The Hue adjustment does not apply to Component Video.
Command Format: [HUEyyCi]
yy= Level (yy = # from 00 to 48, default=24) Ci = Unit ID (i = # from 0 to 99)
12 |