Precautions / Safety Warnings

SPECIAL APPLICATION

Please read this manual carefully before using your AP445-401. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your AP445-401and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

∙Do not open the unit or power supply case, there are high-voltage components inside.

∙There are no user serviceable parts inside. Qualified ALTINEX service personnel must perform all service on the AP445-401.

1.2. RACK-MOUNTING SAFETY GUIDELINES

∙The maximum operating ambient temperature for this unit is 35°C.

∙Never restrict the airflow through the devices fan or vents.

∙Distribute units evenly inside the rack. Hazardous conditions may be created by an uneven weight distribution.

∙Connect the unit to a properly rated supply circuit.

∙Reliable Grounding should be maintained.

1.2 INSTALLATION

∙For best results, place the AP445-401on a flat, leveled surface in a dry area away from dust and moisture.

∙To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the AP445-401in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

∙Handle the AP445-401carefully. Dropping or jarring can damage the unit.

∙Do not pull the cables that are attached to the

AP445-401.

∙Do not place heavy objects on top of the AP445-401.

∙If the AP445-401is not used for an extended period, disconnect the adapter from the wall to avoid fire, shock, and loss of power.

1.3 CLEANING

∙Unplug the AP445-401adapter before cleaning.

∙Clean only with a dry cloth. Never use strong detergents or solvents, such as alcohol or thinner. Do not use a wet cloth or water to clean the unit. Do not open the unit to clean.

1.4 FCC / CE NOTICE

∙This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense.

∙Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

400-0422-001