CLOCK OPERATION
DEFAULT/RECALL DISPLAY
(press & hold)
(press again)
Setting the Clock Hours
1.Press and hold the DISP button for 1 second until the hour digits flash
2.Press the SEEK UP/DN button to set the hour (be sure to select proper AM/PM setting)
Setting the Clock Minutes
1.Press and the DISP button a second time until the minute digits flash
2.Press the SEEK UP/DN button to set the minutes
Considerations
1.The clock will be displayed when the radio power button is turned off
2.Pressing the DISP button will display the clock for 5 seconds when an alternative default dis- play is selected (see DEFAULT/RECALL DISPLAY in this section for more information on program- ming the default display).
AM 12:00 
F1 101.5 
KZON 
AM 12:00 
0401:27 
JANET J 
AM 12:00 
AUX 
Display Recall temporarily displays the clock, radio sta- tion, station title**, CD track/time or disc title* or aux on the LCD for 5 seconds.
Display Recall (TUNER)
1.While in TUNER mode, press the DISP button to cycle through CLOCK>RADIO STATION>STATION TITLE**
2.After 5 seconds the LCD will revert to its default
Display Recall (CDP/CDX)
1.While in CDP/CDX mode, press the DISP button to cycle through CLOCK>TRACK/TIME>DISC TITLE*
2.After 5 seconds the LCD will revert to its default
Display Recall (AUX)
1.While in AUX mode, press the DISP button to switch between CLOCK>AUX*
2.After 5 seconds the LCD will revert to its default
Programming the Default Display
1.While in TUNER/CDP/CDX/AUX* mode, press and hold the DISP button until display flashes (clock set mode)
2.Press the MODE button to cycle through the available default displays
3.Release the MODE button for 1 second to
4.Default displays can be programmed independently for TUNER/CDP/CDX/AUX* modes
*Features available on RFX8230 only
**Features available on RFX8220 & RFX8230 only
– 24 – | – 25 – |