DISC EJECT*
Disc Eject
1.Press the EJECT button to release the disc from the CD player
2.The source unit will revert to P.PLAY or EJ MUTE mode (see TUNER OPTIONS in this manual for further information on programming the default mode)
3.After ignition is turned off, it is possible to eject disc. However, this function may only be performed once with ignition off.
LCD Display
1.The LCD will display EJECT for 5 seconds
2.After 5 seconds, the LCD will revert to the previous display
Auto Reload
1.If the CD is left in the ejected position for more than 10 seconds the disc will automatically reload into the CD player
2.The auto reload operation will not restart play- ing the disc or affect any other current mode (Except EJ MUTE Mode)
*NOTE: This function works in CD Player mode only.
CD Changer Operation
(Optional Accessory)
LOADING THE CD CHANGER
Loading Disc to the Magazine
1.Pull out the desired disc tray number from the magazine
2.Place the disc into the magazine label side up
3.Push the disc tray back into the magazine
NOTE: Discs numbers are arranged from the top down
Loading the Magazine to the CD Changer
1.The INSERT IN THIS DIRECTION arrow indi- cates the proper direction that the magazine should be loaded into the CD changer
CAUTION
Avoid installing or leaving the magazine where it would be subject to high temperatures such as from direct sunlight or from hot air from the heater. Doing so will damage the unit.
– 40 – | – 41 – |