Rockford Fosgate RFX8230 Cdx Eject/Reset, Auxiliary Operation, Magazine Eject, CD Changer Reset

CDX EJECT/RESET

Magazine Eject

1. Press the EJECT button to release the magazine disc from the CD changer

2. The source unit will revert to TUNER mode

NOTE: A disc may be ejected during any mode or if the radio power/ignition is off

LCD Display

1. The LCD will display NO CD

CD Changer Reset

•Press the RESET button if the changer gets jammed

RESET during operation

AUXILIARY OPERATION

AUX MODE*

AUX Mode

1.Press the MODE button until AUX is displayed

2.The AUX input will immediately "see" the

TUNER	auxiliary audio input being fed into the AUX
	RCA jacks
CDP
CDX
AUX	LCD Display

1.AUX will be displayed for 5 seconds

2.After 5 seconds the LCD will revert to the default display

NOTE: The input signal connected to the AUX RCA jacks is fed into the source unit prior to the volume control. If the AUX input source has a constant (non-adjustable) out- put level, the volume control on the face- plate can properly adjust the amplitude. The maximum signal the AUX circuit can accept without clipping is 2.4V RMS. More than 2.4V RMS input voltage can be applied to the circuit, however the signal will be clipped (producing gain overlap).

*Feature available on RFX8230 only

– 44 – – 45 –