RCU807US_IB_REVB 9/26/03 10:18 Page 3
Universal Learning Remote with LCD Status Display
Congratulations on your purchase of the RCU807. This unit is one of the most sophisticated, yet easy to use, remote controls available today. With the RCU807, juggling multiple remote controls is a thing of the past! This one unit controls up to eight components, including the most popular brands of TV, VCR, DVD, PVR, SAT•CBL, CD and AUDIO equipment. The RCU807 has the ability to learn commands from your existing remotes, and the SmartMacro™ feature allows multiple commands to be executed with two simple keypresses. The RCU807 is easy to use, easy to program, and it gives you total
Battery Information
Your RCU807 Universal Learning Remote with LCD Status Display requires four AAA alkaline batteries (sold separately).
Battery Installation
To install the batteries:
1.Turn the unit over, lift tab and pick the cover up.
2.Insert the batteries, matching the batteries to the (+) and
3.Replace the battery cover and snap into place.
Battery Saver
Your RCU807 saves battery power by automatically turning off if any key is pressed for more than 30 seconds. This saves your batteries should your remote get stuck in a place where the keys remain depressed, such as under a book or between the sofa cushions.
Code Saver
With the RCU807, you don’t have to worry about losing programmed information when you change batteries. All programmed parameters are retained indefinitely in the event of battery replacement.
Power-on Default
When you replace batteries, your RCU807 remote always powers on in the TV Mode. If your TV, VCR, DVD, or satellite receiver are RCA, PROSCAN or GE brands, you may not even need to set up the RCU807 to control them. In these instances, the remote should work as soon as the batteries are installed.
3