RCU807US_IB_REVB 9/26/03 10:18 Page 5
Enter Setup Mode
The following are the screen selections available in the Setup Mode.
1. Setup Mode?
2. Set Time Display?
3. Timer 1 Mode?
4. Timer 2 Mode?
5. Timer 3 Mode?
6. Timer 4 Mode?
7.Cancel Timer 1 (Only appears once Timer 1 has been set.)
8.Cancel Timer 2 (Only appears once Timer 2 has been set.)
9.Cancel Timer 3 (Only appears once Timer 3 has been set.)
10.Cancel Timer 4 (Only appears once Timer 4 has been set.)
11. Learn Mode?
12.Clear Mode?
(Only appears after commands have been learned.)
13.Reset?
(Master Reset to clear all settings— return to factory default)
14.Exit
Exit Setup Mode
To exit the Setup Mode at any time and return to normal operation, follow these steps:
1.Press and release the CLEAR key.
The remote is now in normal operation mode.
OR
2.Press and release the SETUP (S) key repeatedly until the status display shows the Exit Screen. Press and release the ENTER key. The remote is now in normal operation mode.
During a Setup function, if no key is pressed for 30 seconds, the unit automatically exits from the Setup mode. The status display shows the TimeOut Screen for three seconds prior to returning to normal operation. Any operation that is not completed when the timeout occurs is not saved.
5