Radio Operation
Selecting The Frequency Band Press BAND button (13) to select the desired band. The reception band will change between FM and AM.
Stereo/Mono
Press ST (1) or MO/ST (23) on the remote control to select mono/stereo mode.
Local/Distant
Press ST/LOC (1) for several seconds or LO/DX (34) on the remote control to select between local and distant stations. LOCAL setting is reception of strong station, and DISTANT setting is reception of weaker stations.
Selecting Station
-Press preset
-Press / for several seconds until “MANUAL” appears on the display, and then press / button to select a station. If both buttons have not been pressed for several seconds, they will return to automatic seek mode .
Automatic Memory Storing & Program Scanning
-Automatic memory storing Press AMS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.
-Program scanning
Press AMS button (18) to scan preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, and then searches again.
Station Storing
- Press / button to activate automatic
seek mode.
-In manual mode, press / button to select a station.
Press preset
DISC Operation
Playback
1.Insert a disc with the label side facing up; the disc will be pulled into the unit automatically. Display the console information of the current disc on the screen.
2.For CD:
3. For MP3:
1). Press ◄/► button to move between work area A, B and C.
2). Press ▲/▼ button to select the desired folder or file of this work area.
3). Press ENTER button (31) to confirm the selected item.
Selecting Tracks In Single Step
-Press button (16) or button (17) to skip to the previous track or the following track. Track number shows on display.
-Press and hold button (16) or
9