Use ▲/▼/◄/► cursor button to select the item that you want to program.
1). The item you selected will become highlight.
2). Input the track number that you want to program by numeric buttons
3). Press ▲/▼/◄/► cursor buttons to move to "PLAY" operation button and then press ENTER button (31) to program playback.
Frequently Asked Questions
-When inserting a DVD disc, why it can't be played, just showing “region error”?
It is because that the DVD player and
the discs all have the “REGION CODE”. If the region number described on the DVD disc does not correspond to the region number of this DVD player, the unit cannot play the disc.
-When inserting a DVD disc, there is a window shown on the screen that requires entering 4 characters password, why?
It is because that the current disc has “Parental Control” level, and the player's parental level is set below the level of the disc, you should enter the correct password to play the disc normally.
NOTE:
For how to set the “Parental Control” level, please refer to “Parental Control” on page 18.
Data Disc Play Operation
When you insert a data disc including audio (MP3), movie (MPEG4), picture (JPG) files into the disc slot, the following
media play window will be shown on the screen:
Explain as follows:
Work area A: folders list
Work area B: files list
Work area C:
(1): playback audio mode (default)
(2): viewing picture mode
(3): playback movie mode
Work area D: file information display
1.Press ◄/► button to move between work area A, B and C.
2.Press ▲/▼ button to select the desired folder or file of this work area.
3.Press ENTER button (31) to confirm the selected item.
4.In viewing picture or playback movie mode, if you want to return to the previous menu, press (STOP) button.
13