Setup
In DVD mode, when the disc is playing or in stop mode, press SETUP button (32) to enter setup menu.
1.When the cursor is on the topside, use ◄/► buttons to move between the different pages.
2.Press ▼ button to move the cursor to the setup page below and then you can use ▲/▼ buttons to move between the different setup options.
3.Press ► or ENTER button to move to the choice list of each setup option, and then use ▲/▼ buttons and ENTER button to change your selection.
4.When the setting is complete, press SETUP button (32) to return to normal mode.
* When settings are changed, old settings are overwritten. Make a note of the current settings before making changes. If the vehicles battery is disconnected, the settings will be cleared and will return to the factory settings.
System Setup
When you open the setup menu, you will see the system setup page at first, see below:
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM
TV SYSTEM is used to select the TV output mode. This player can play discs recorded in either PAL or NTSC formats. Select NTSC format, when the unit is connected to NTSC TV.
Select PAL format, when the unit is connected to PAL TV.
Select AUTO format, the player TV output Change the TV mode among NTSC, PAL
and AUTO. The default setting is NTSC format.
SCREEN SAVER
Change the SCREEN SAVER on or off.
SETTING the TV TYPE
Use the procedure described below to set the output screen according to the type of TV monitor being used.
Setting contents: 4:3PS /4:3LB /16:9. For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc's jacket.)
4:3 PS (PAN SCAN)
Select this when connected to a conventional 4:3size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie).
This is selected upon shipment from the factory.
4:3 (LETTER BOX)
Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black bands visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatre release of the movie.
16:9
Select this when connected to a wide screen TV.
15