PYLE Audio PLD70BT Preparing the Remote Control, Inserting the Battery, Using the Remote Control

Remote Control

Ref # Button Function

23ENTER This button is used to confirm selections and settings within many of the menus in the OSD system.

24	0-9	Use to input numerical values during programming, with the GOTO
		button, or to directly select a track to play .
		In addition, in Radio Mode (when RDS is engaged), 0 serves as
		the TA button and 9 serves as the AF button.
25	+10/	This button is used with the other number buttons for use with
		two-digit number entries. In Bluetooth menu, it serves as the hash
		button on your mobile handset.
26	1-6	Six numbered preset buttons store and recall stations for each band

Preparing the Remote Control

Inserting the Battery

1.First push to inside as the direction indicated by the arrow (See 1 )And then

Remove the battery holder as the direction indicated by the arrow (See 2 ).

2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ).

3.Insert the battery holder. Push in the holder to the original position(See 4 ).

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

-12-