Bluetooth Operation
Bluetooth Car Kit User Manual
1.“Pair” To Your Bluetooth Phone
Prior to using the Car Kit for the fist time, you must pair it with a
The following steps describes pairing the instruction for a typical Bluetooth- enabled mobile handset.
Touch the touch screen , the touch operation menu will display. Touch the “ 
” section to select , it will display following as below :
FLAT |
| 12: 16 |
|
|
| ||
DVD |
| ||
PAIR |
| DIAL | REDIAL |
AUDIO |
| SUBTITLE | ZOOM |
| SETUP | TITLE |
|
5). Enter passkey “8888”, then press
“OK” to pair the Car Kit and the handset, the word “PAIR OK” , will display in the TFT .
6). Select the “CONNECT” from the list
on the phone, if you connect success-
fully , the 
ICON remains solid on the screen , then you can operate the function of
Important:
1). If the pairing can not be completed within approximately 2 minutes , whiles the pairing mode is activated, and you will need to reattempt pairing
(See steps
2). After pairing is completed, if the 
ICON is stilling flash on the TFT , please follow the steps to reattempt pairing through your handset until the 
ICON remains solid on the screen.
Touch to select
1). Place the Car Kit and mobile handset in 3 meters apart.
2). Put the Car Kit in pairing mode.
a. Press the POWER button to turn ON, the 
ICON will flash on the TFT .
b. Touch the screen of “ 
PAIR ” range or press the “PAIR/ 
” on the remote control until the word “BLUETOOTH PAIRING ” display, it’s now ready for pairing.
3). Set your bluetooth phone to “discover” the Car Kit .
Following your phone’s instruction guide for details, active your mobile handset’s Bluetooth function, the handset will search for accessible Bluetooth devices.
4). Your phone will find this Car Kit . Select this Car Kit from the list.
2.Using The Bluetooth Car Kit.
Once connecting is complete, you may access the following function. Some of the below mentioned functions only accessible for handset supported with
Make a call
Touch the screen of “ 
DIAL ” range, (or press briefly the “ PAIR/ 
” button on the remote control ) the word
“DIAL NUMBERS” will display on the TFT . then you can touch the number section on screen (or dial the number buttons on the remote control ), and then touch the
“
DIAL ” section or press “ PAIR/ 
” button to confirm .
Note: When you dial the wrong number, you can touch the screen “ CLEAR ” to delete the wrong number . (You can also press the “ 
” button on the remote control to do so .)
Please note : “ 
” and “ 
” serves as the “ 
” and “ 
” button on your mobile handset .