Radio Operation
Storing Stations In Memory
With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band.
The operation is as below :
Touch the screen of the “
FLAT |
|
| 12:06 | TA |
|
| ST |
|
| DX | |
FM1 |
|
| 87.60 MHZ |
| |
| MODE | MUTE ON |
| ||
1 | 2 | 3 | 4 | 5 | 6 |
VOLUME- | SEL | VOLUME+ |
|
Touch to preset station
-Store in Memory
>Select the frequency band
>Select the station
>Keep the desired memory key pressed in until the station is heard again after a brief interruption .
e.g. FM1, for the stronger signal
level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Scan Function
APS In Radio mode, briefly touch the APS section on the touch screen , the radio briefly plays all the
preset stations of the frequency band .
RDS FUNCTION
In Radio mode, touch it to select the desired item, it will display the following as below :
FLAT | 12:06 | AF |
| |
ST |
| DX |
| |
FM1 | 87.60 MHZ |
|
| |
TA | AF | PTY | Touch to select | |
| ||||
CLOCK |
| LOUDNESS | LOC |
|
-Retrieve a preset station
Touch the
Automatic Memory Storing & Program Scanning
Automatic Preset Setup
APS In Radio Mode, Touch and keep the APS section on the touch screen
for about 2 seconds to active
automatic station storage. The radio searches within the current frequency band,
TA Traffic Annonuncement
(priority For Traffic Information)
TA | In Radio mode, touch briefly the |
| |
| screen of “TA” range to activate |
| the TA function. |
Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) .
If an FM station is being received which transmits the latest traffic announce- ments from time to time, the TP display lights up.