Basic Operation
Balance: R
Adjust sound balance between left and right speakers by using VOL + /
Adjust sound balance between front and rear speakers by using VOL + / VOL
Setting Audio Modes
ALTERNATE AUDIO/VIDEO SOURCE
On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as
DVD players, computers, etc. Via the loudspeakers.
DSP
Touch the screen the DSP range (or press the EQ button on the remote control ) to select one of the preset sound modes .
1) | . Please following the diagram below, |
connect the external device with stereo | |
jack plug the AUX IN socket . | |
2) | . Press the MOD button to select the |
AUX IN connection. | |
3) | . Use the buttons on the external |
(Rock/Pop/Jazz/Classic/Flat) . The information will display in the monitor as follow :
device itself to operate it . |
POP | ROCK |
| JAZZ | |
|
|
|
| AUX IN |
FLAT |
|
|
| CLASSIC |
FLAT | 16: 18 |
|
| AUX IN |
| ROCK | |||
|
|
| ||
RANDOM | REPEAT | INTRO | ||
TA | AF | CLK | LUD | |
OSD | DSP | GOTO | Headphones port |
touch to select
It`s depend on your habit to select the
Audio mode .
Reset Factory Settings
RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.
The RESET button is to be activated for the following reasons:
A. Initial installation of the unit when all wiring is completed.
B. All the function buttons do not operate. C. Error symbol on the display.