15 16 | Orion Car Audio XTREME 600.4 instruction

1.Power LED - lights up when the amplifier is on

2.Low-pass crossover frequency control-adjusts the front channel low-pass crossover frequency

3.Low-pass crossover switch-activates the front channel low-pass crossover

4.INTELLiQ gain-adjusts the level of INTELLiQ from 0dB to 10dB of boost.

5.High-pass crossover “x10” switch-changes the high-pass crossover frequency range

6.High-pass crossover frequency control-adjusts the front channel high-pass crossover frequency

7.High-pass crossover switch-activates the front channel high-pass crossover

8.Front Gain Control - continuously adjusts from 200mV to 5Vrms for full power output

9.Front Output Configuration Switch - determines the output configuration for the front channels

10.Front RCA Inputs- accepts RCA input from a source unit, preampli- fier or equalizer for the front channels

11.Rear RCA Inputs- accepts RCA input from a source unit, preampli- fier or equalizer for the rear channels

12.2-Channel / 4-Channel Switch - configures the amplifier for two or four RCA inputs

13.Rear Output Configuration Switch - determines the output configuration for the rear channels

14.Rear Crossover Control - adjusts the frequency for the rear channels

15.Rear channel input configures rear channels for direct input or output of front channel crossover and gain

16.Rear Gain Control - continuously adjusts from 200mV to 5Vrms for full power output

15 16 17

17.Rear Crossover Switch - configures the rear channel for high- pass, low-pass or full range operation

18.REM Remote Turn-on Input - turns on the amplifier when fed 12 V+

19.Front speaker output- allows up to 12 gauge speaker wire

20.Rear speaker output- allows up to 12 gauge speaker wire

21.Remote Gain-allows dashboard control of the amplifier output level

22.Fuse - protects the amplifier from over current situations

23.Power Connections - allow up to 4 gauge power and ground cables

page 11